Microdeck.tools 100% In-Browser

LED Series & Parallel Resistor Calculator

New

Enter supply voltage, LED forward voltage and current to get the resistor value, the nearest E24 part, its power rating and the actual LED current.

100% In-Browser No Server Storage Instant Results

Did this tool save you time? Help keep Microdeck free and maintained. Completely optional · From $3.

How It Works Under the Hood

The resistor drops whatever voltage the LEDs do not use: R = (supply − number of LEDs in series × forward voltage) ÷ current. For a parallel bank with one resistor per LED each branch is calculated separately. With one shared resistor the currents add, so the resistor carries the total and the LEDs share it unevenly, which is why the tool flags that layout.

Step-by-Step Instructions

1

Choose the layout: one LED or a series string, parallel with one resistor per LED, or parallel sharing one resistor.

2

Enter the supply voltage, the LED forward voltage from its datasheet and the target current.

3

Enter how many LEDs you are driving.

4

Read the exact resistance, the next standard E24 value, the resistor power and the real current with that standard part.

Key Features & Performance

  • Three layouts in one tool
  • Rounds up to the next E24 value so the LED never exceeds the target current
  • Resistor power with a safe rating suggestion
  • Warns when the supply is too low for the LEDs in series

Methodology, Formulas & Technical Standards

Ohm law on the leftover voltage. The standard value is the smallest E24 value at or above the exact result, so real current is slightly lower than the target.

Worked Examples & Edge Cases

Three LEDs in series

Input
12 V supply, 3.2 V forward, 20 mA, 3 LEDs in series
Output
120 Ω, 0.048 W

12 − 3 × 3.2 = 2.4 V across the resistor; 2.4 ÷ 0.02 = 120 Ω.

Four parallel LEDs, one resistor each

Input
9 V, 3.2 V, 20 mA
Output
290 Ω exact, 300 Ω E24 per LED

Limitations, Scope & Accuracy Notes

  • • Forward voltage varies with colour, current and temperature, so use the datasheet value and verify with a meter.
  • • Sharing one resistor between parallel LEDs is not recommended; small differences in forward voltage make the currents unequal.

Local Browser Processing & Privacy

Traditional web converters upload your documents, snippets, or media files to remote servers. LED Series & Parallel Resistor Calculator runs inside your browser tab:

Processed in This Tab

Your input text and files are processed locally without uploading payloads to a processing server.

No Tool Payload Logging

Microdeck does not log or store the files or inputs you paste into tool workspaces (normal static hosting/CDN requests still load page assets).

Tab Memory Lifecycle

Working outputs stay in your browser tab and are released when you reset the tool or close the tab.

Frequently Asked Questions

Why not use a resistor slightly below the calculated value?

A smaller resistor passes more current. Rounding up to the next E24 value keeps the LED at or below the target current.

What if my supply is lower than the total forward voltage?

The LEDs will not reach full brightness. Use fewer LEDs in series or a higher supply, or split them into parallel branches.

Is anything uploaded?

No. The calculation happens in your browser.

Explore Related Micro-Tools

Support Microdeck

Completely optional · From $3 · No account required

Choose an amount (USD):Selected:$5

Minimum support amount is $3 USD.

Completely optional · From $3 · Checkout opens on Gumroad.