Microdeck.tools 100 % im Browser

LED-Vorwiderstand: Reihen- & Parallelschaltung

New

Berechnen Sie aus Versorgungsspannung, Flussspannung und Strom den Widerstand, den nächsten E24-Wert, die Verlustleistung und den tatsächlichen LED-Strom.

100 % im Browser Kein Server-Upload Sofort-Ergebnisse

Hat Ihnen dieses Tool Zeit gespart? Helfen Sie mit, Microdeck kostenlos und aktuell zu halten. Freiwillig · Ab $3.

So funktioniert es unter der Haube

The resistor drops whatever voltage the LEDs do not use: R = (supply − number of LEDs in series × forward voltage) ÷ current. For a parallel bank with one resistor per LED each branch is calculated separately. With one shared resistor the currents add, so the resistor carries the total and the LEDs share it unevenly, which is why the tool flags that layout.

Schritt-für-Schritt-Anleitung

1

Choose the layout: one LED or a series string, parallel with one resistor per LED, or parallel sharing one resistor.

2

Enter the supply voltage, the LED forward voltage from its datasheet and the target current.

3

Enter how many LEDs you are driving.

4

Read the exact resistance, the next standard E24 value, the resistor power and the real current with that standard part.

Wichtige Funktionen & Vorteile

  • Three layouts in one tool
  • Rounds up to the next E24 value so the LED never exceeds the target current
  • Resistor power with a safe rating suggestion
  • Warns when the supply is too low for the LEDs in series

Methodik, Formeln & technische Standards

Ohm law on the leftover voltage. The standard value is the smallest E24 value at or above the exact result, so real current is slightly lower than the target.

Praxisbeispiele & Grenzfälle

Three LEDs in series

Eingabe
12 V supply, 3.2 V forward, 20 mA, 3 LEDs in series
Ausgabe
120 Ω, 0.048 W

12 − 3 × 3.2 = 2.4 V across the resistor; 2.4 ÷ 0.02 = 120 Ω.

Four parallel LEDs, one resistor each

Eingabe
9 V, 3.2 V, 20 mA
Ausgabe
290 Ω exact, 300 Ω E24 per LED

Hinweise zu Grenzen & Genauigkeit

  • • Forward voltage varies with colour, current and temperature, so use the datasheet value and verify with a meter.
  • • Sharing one resistor between parallel LEDs is not recommended; small differences in forward voltage make the currents unequal.

Lokale Verarbeitung im Browser & Datenschutz

Herkömmliche Online-Konverter laden Ihre Dokumente, Texte oder Mediendateien auf fremde Server. LED-Vorwiderstand: Reihen- & Parallelschaltung läuft direkt in Ihrem Browser-Tab:

Verarbeitung in diesem Tab

Ihre Texte und Dateien werden lokal berechnet, ohne Inhalte an einen Verarbeitungsserver zu senden.

Keine Speicherung von Eingaben

Microdeck protokolliert oder speichert weder Ihre Dateien noch Texteingaben (normale CDN-Abrufe laden lediglich die statische Seite).

Flüchtiger Tab-Speicher

Arbeitsergebnisse bleiben ausschließlich im Arbeitsspeicher des Tabs und werden beim Zurücksetzen oder Schließen freigegeben.

Häufig gestellte Fragen (FAQ)

Why not use a resistor slightly below the calculated value?

A smaller resistor passes more current. Rounding up to the next E24 value keeps the LED at or below the target current.

What if my supply is lower than the total forward voltage?

The LEDs will not reach full brightness. Use fewer LEDs in series or a higher supply, or split them into parallel branches.

Is anything uploaded?

No. The calculation happens in your browser.

Ähnliche Mikro-Tools entdecken

Microdeck unterstützen

Vollkommen freiwillig · Ab $3 · Kein Konto nötig

Betrag wählen (USD):Ausgewählt:$5

Der Mindestbetrag beträgt $3 USD.

Vollkommen freiwillig · Ab $3 · Checkout öffnet über Gumroad.