Microdeck.tools 100% no navegador

Calculadora de resistor para LED em série e paralelo

New

Calcule o resistor, o valor E24 mais próximo, sua potência e a corrente real a partir da tensão da fonte, da tensão direta e da corrente.

100% no navegador Sem envio ao servidor Resultados na hora

Esta ferramenta economizou seu tempo? Ajude a manter o Microdeck grátis e atualizado. Opcional · A partir de $3.

Como funciona por dentro

The resistor drops whatever voltage the LEDs do not use: R = (supply − number of LEDs in series × forward voltage) ÷ current. For a parallel bank with one resistor per LED each branch is calculated separately. With one shared resistor the currents add, so the resistor carries the total and the LEDs share it unevenly, which is why the tool flags that layout.

Passo a passo de uso

1

Choose the layout: one LED or a series string, parallel with one resistor per LED, or parallel sharing one resistor.

2

Enter the supply voltage, the LED forward voltage from its datasheet and the target current.

3

Enter how many LEDs you are driving.

4

Read the exact resistance, the next standard E24 value, the resistor power and the real current with that standard part.

Principais recursos e vantagens

  • Three layouts in one tool
  • Rounds up to the next E24 value so the LED never exceeds the target current
  • Resistor power with a safe rating suggestion
  • Warns when the supply is too low for the LEDs in series

Metodologia, fórmulas e padrões técnicos

Ohm law on the leftover voltage. The standard value is the smallest E24 value at or above the exact result, so real current is slightly lower than the target.

Exemplos resolvidos e casos especiais

Three LEDs in series

Entrada
12 V supply, 3.2 V forward, 20 mA, 3 LEDs in series
Saída
120 Ω, 0.048 W

12 − 3 × 3.2 = 2.4 V across the resistor; 2.4 ÷ 0.02 = 120 Ω.

Four parallel LEDs, one resistor each

Entrada
9 V, 3.2 V, 20 mA
Saída
290 Ω exact, 300 Ω E24 per LED

Limitações e notas de precisão

  • • Forward voltage varies with colour, current and temperature, so use the datasheet value and verify with a meter.
  • • Sharing one resistor between parallel LEDs is not recommended; small differences in forward voltage make the currents unequal.

Processamento local no navegador e privacidade

Conversores comuns enviam seus documentos, códigos ou vídeos para servidores externos. O Calculadora de resistor para LED em série e paralelo roda direto na sua aba:

Processado nesta aba

Seus textos e arquivos são processados localmente sem enviar conteúdo para servidores.

Sem registro de conteúdo

O Microdeck não registra nem armazena arquivos ou dados colados nas ferramentas.

Memória temporária da aba

Os resultados ficam apenas na memória do navegador e somem ao fechar ou limpar a aba.

Perguntas frequentes (FAQ)

Why not use a resistor slightly below the calculated value?

A smaller resistor passes more current. Rounding up to the next E24 value keeps the LED at or below the target current.

What if my supply is lower than the total forward voltage?

The LEDs will not reach full brightness. Use fewer LEDs in series or a higher supply, or split them into parallel branches.

Is anything uploaded?

No. The calculation happens in your browser.

Outras ferramentas relacionadas

Apoiar o Microdeck

Totalmente opcional · A partir de $3 · Sem cadastro

Escolha um valor (USD):Selecionado:$5

O valor mínimo é de $3 USD.

100% opcional · A partir de $3 · Checkout seguro no Gumroad.