Microdeck.tools 100% no navegador

Bitola de fio (AWG) e queda de tensão

New

Encontre o menor AWG que respeita sua queda máxima ou calcule queda, resistência e perda. Cobre e alumínio.

100% no navegador Sem envio ao servidor Resultados na hora

Esta ferramenta economizou seu tempo? Ajude a manter o Microdeck grátis e atualizado. Opcional · A partir de $3.

Como funciona por dentro

AWG diameter follows d = 0.127 mm × 92^((36 − n) ÷ 39), and area is π × d² ÷ 4. Wire resistance is ρ × length ÷ area, with ρ = 0.017241 Ω·mm²/m for copper and 0.02824 for aluminium at 20 °C. Because current flows out and back, the tool uses twice the one-way length. Drop = I × R, and the tool picks the smallest standard gauge whose drop is within your limit.

Passo a passo de uso

1

Choose whether to size a wire or to check a chosen gauge.

2

Enter current, one-way length and supply voltage.

3

Enter the maximum acceptable drop in percent, or pick the AWG to test.

4

Read the gauge, area, drop in volts and percent and the power lost in the wire.

Principais recursos e vantagens

  • Standard sizes from 4/0 to AWG 40
  • Copper and aluminium
  • Results in AWG and mm²
  • Round-trip length handled automatically

Exemplos resolvidos e casos especiais

Sizing

Entrada
20 A, 10 m one way, 12 V, 3% drop
Saída
AWG 4 (21.2 mm²)

0.36 V over a 20 m round trip needs about 19.2 mm².

Reference

Entrada
AWG 12
Saída
2.053 mm diameter, 3.309 mm²

Limitações e notas de precisão

  • • This is a voltage-drop result, not an ampacity or code rating. Insulation, bundling and ambient temperature limit safe current; follow your local electrical code.
  • • Resistance rises about 0.4% per °C above 20 °C, so hot runs drop more.

Processamento local no navegador e privacidade

Conversores comuns enviam seus documentos, códigos ou vídeos para servidores externos. O Bitola de fio (AWG) e queda de tensão roda direto na sua aba:

Processado nesta aba

Seus textos e arquivos são processados localmente sem enviar conteúdo para servidores.

Sem registro de conteúdo

O Microdeck não registra nem armazena arquivos ou dados colados nas ferramentas.

Memória temporária da aba

Os resultados ficam apenas na memória do navegador e somem ao fechar ou limpar a aba.

Perguntas frequentes (FAQ)

Why does 12 V need such thick wire?

The same percentage drop is a much smaller voltage at 12 V, so low-voltage runs need larger conductors than mains circuits.

Is a lower AWG number a thicker wire?

Yes. AWG 10 is thicker than AWG 14. Sizes above 1 go to 1/0, 2/0, 3/0 and 4/0.

Can I use this for AC?

For short low-frequency runs it is a good estimate. Long AC runs also depend on reactance and power factor.

Outras ferramentas relacionadas

Apoiar o Microdeck

Totalmente opcional · A partir de $3 · Sem cadastro

Escolha um valor (USD):Selecionado:$5

O valor mínimo é de $3 USD.

100% opcional · A partir de $3 · Checkout seguro no Gumroad.