Microdeck.tools 100% In-Browser

555 Timer Calculator

New

Calculate the 555 timer output frequency, high and low times and duty cycle from R1, R2 and C, or the one-shot pulse width from R and C.

100% In-Browser No Server Storage Instant Results

Did this tool save you time? Help keep Microdeck free and maintained. Completely optional · From $3.

How It Works Under the Hood

In astable mode the capacitor charges through R1 and R2 and discharges through R2, so the output high time is 0.693 × (R1 + R2) × C and the low time is 0.693 × R2 × C. In monostable mode one trigger gives one pulse of 1.1 × R × C. The tool does both and shows the period, frequency and duty cycle.

Step-by-Step Instructions

1

Choose astable or monostable.

2

Enter the resistors and the capacitor, for example 1k, 10k and 10n.

3

Read the frequency, period, high and low times, or the pulse width.

Key Features & Performance

  • Astable and monostable
  • Frequency, period, high time, low time and duty cycle
  • SI suffix input
  • Warns about a too-small R1

Methodology, Formulas & Technical Standards

Astable: f = 1 / (ln2 × (R1 + 2R2) × C). Monostable: T = ln3 × R × C ≈ 1.1 × R × C.

Worked Examples & Edge Cases

R1 1k, R2 10k, C 10n

Input
Astable
Output
≈ 6.9 kHz, duty ≈ 52%

R 100k, C 10n

Input
Monostable
Output
≈ 1.1 ms

Limitations, Scope & Accuracy Notes

  • • Tolerance of the 555 and the components shifts the result by several percent.
  • • The standard astable circuit cannot give a duty cycle below 50%.

Local Browser Processing & Privacy

Traditional web converters upload your documents, snippets, or media files to remote servers. 555 Timer Calculator runs inside your browser tab:

Processed in This Tab

Your input text and files are processed locally without uploading payloads to a processing server.

No Tool Payload Logging

Microdeck does not log or store the files or inputs you paste into tool workspaces (normal static hosting/CDN requests still load page assets).

Tab Memory Lifecycle

Working outputs stay in your browser tab and are released when you reset the tool or close the tab.

Frequently Asked Questions

How do I get a 50% duty cycle?

Add a diode in parallel with R2, or divide the output by two with a flip-flop.

Does it work for NE555, LM555 and the CMOS 7555?

Yes, the timing equations are the same.

Is anything stored?

No.

Explore Related Micro-Tools

Support Microdeck

Completely optional · From $3 · No account required

Choose an amount (USD):Selected:$5

Minimum support amount is $3 USD.

Completely optional · From $3 · Checkout opens on Gumroad.