So funktioniert es unter der Haube
In astable mode the capacitor charges through R1 and R2 and discharges through R2, so the output high time is 0.693 × (R1 + R2) × C and the low time is 0.693 × R2 × C. In monostable mode one trigger gives one pulse of 1.1 × R × C. The tool does both and shows the period, frequency and duty cycle.
Schritt-für-Schritt-Anleitung
Choose astable or monostable.
Enter the resistors and the capacitor, for example 1k, 10k and 10n.
Read the frequency, period, high and low times, or the pulse width.
Wichtige Funktionen & Vorteile
- Astable and monostable
- Frequency, period, high time, low time and duty cycle
- SI suffix input
- Warns about a too-small R1
Methodik, Formeln & technische Standards
Astable: f = 1 / (ln2 × (R1 + 2R2) × C). Monostable: T = ln3 × R × C ≈ 1.1 × R × C.
Praxisbeispiele & Grenzfälle
R1 1k, R2 10k, C 10n
Astable
≈ 6.9 kHz, duty ≈ 52%
R 100k, C 10n
Monostable
≈ 1.1 ms
Hinweise zu Grenzen & Genauigkeit
- • Tolerance of the 555 and the components shifts the result by several percent.
- • The standard astable circuit cannot give a duty cycle below 50%.
Lokale Verarbeitung im Browser & Datenschutz
Herkömmliche Online-Konverter laden Ihre Dokumente, Texte oder Mediendateien auf fremde Server. NE555 Timer Rechner (Astabil & Monostabil) läuft direkt in Ihrem Browser-Tab:
Ihre Texte und Dateien werden lokal berechnet, ohne Inhalte an einen Verarbeitungsserver zu senden.
Microdeck protokolliert oder speichert weder Ihre Dateien noch Texteingaben (normale CDN-Abrufe laden lediglich die statische Seite).
Arbeitsergebnisse bleiben ausschließlich im Arbeitsspeicher des Tabs und werden beim Zurücksetzen oder Schließen freigegeben.
Häufig gestellte Fragen (FAQ)
How do I get a 50% duty cycle?
Add a diode in parallel with R2, or divide the output by two with a flip-flop.
Does it work for NE555, LM555 and the CMOS 7555?
Yes, the timing equations are the same.
Is anything stored?
No.