Cara Kerja di Balik Layar
In astable mode the capacitor charges through R1 and R2 and discharges through R2, so the output high time is 0.693 × (R1 + R2) × C and the low time is 0.693 × R2 × C. In monostable mode one trigger gives one pulse of 1.1 × R × C. The tool does both and shows the period, frequency and duty cycle.
Panduan Langkah demi Langkah
Choose astable or monostable.
Enter the resistors and the capacitor, for example 1k, 10k and 10n.
Read the frequency, period, high and low times, or the pulse width.
Fitur Utama & Performa
- Astable and monostable
- Frequency, period, high time, low time and duty cycle
- SI suffix input
- Warns about a too-small R1
Metodologi, Rumus & Standar Teknis
Astable: f = 1 / (ln2 × (R1 + 2R2) × C). Monostable: T = ln3 × R × C ≈ 1.1 × R × C.
Contoh Kasus & Uji Coba
R1 1k, R2 10k, C 10n
Astable
≈ 6.9 kHz, duty ≈ 52%
R 100k, C 10n
Monostable
≈ 1.1 ms
Catatan Batasan & Akurasi
- • Tolerance of the 555 and the components shifts the result by several percent.
- • The standard astable circuit cannot give a duty cycle below 50%.
Pemrosesan Lokal di Browser & Privasi
Konverter web konvensional mengunggah dokumen, teks, atau media ke server jarak jauh. Kalkulator Timer IC 555 (Astable & Monostable) berjalan langsung di tab browser Anda:
Teks dan file Anda diproses secara lokal tanpa mengirim muatan apa pun ke server.
Microdeck tidak mencatat atau menyimpan file dan teks yang Anda masukkan ke ruang kerja alat.
Hasil kerja hanya tersimpan di memori tab dan langsung terhapus saat Anda me-reset atau menutup tab.
Pertanyaan yang Sering Diajukan (FAQ)
How do I get a 50% duty cycle?
Add a diode in parallel with R2, or divide the output by two with a flip-flop.
Does it work for NE555, LM555 and the CMOS 7555?
Yes, the timing equations are the same.
Is anything stored?
No.
Jelajahi Alat Mikro Terkait
Kalkulator Konstanta Waktu RC
Hitung Tau (R × C), waktu pengisian kapasitor dan tegangan sesaat
Kalkulator Resistor LED Seri & Paralel
Resistor pembatas arus untuk satu LED, rangkaian seri, atau susunan paralel
Dekoder Kode Kapasitor
Baca kode 104, 473K, 2A104J atau 4n7 dan dapatkan nilai pF, nF, dan µF