Microdeck.tools 100 % en el navegador

Calculadora de Temporizador 555 (Astable y Monoestable)

New

Diseña circuitos con el temporizador 555 en modo astable o monoestable calculando frecuencia y tiempos de conmutación.

100 % en tu navegador Sin subir archivos Resultados al instante

¿Te ahorró tiempo esta herramienta? Ayuda a mantener Microdeck gratis y al día. Opcional · Desde $3.

Cómo funciona por dentro

In astable mode the capacitor charges through R1 and R2 and discharges through R2, so the output high time is 0.693 × (R1 + R2) × C and the low time is 0.693 × R2 × C. In monostable mode one trigger gives one pulse of 1.1 × R × C. The tool does both and shows the period, frequency and duty cycle.

Instrucciones paso a paso

1

Choose astable or monostable.

2

Enter the resistors and the capacitor, for example 1k, 10k and 10n.

3

Read the frequency, period, high and low times, or the pulse width.

Funciones principales y ventajas

  • Astable and monostable
  • Frequency, period, high time, low time and duty cycle
  • SI suffix input
  • Warns about a too-small R1

Metodología, fórmulas y estándares técnicos

Astable: f = 1 / (ln2 × (R1 + 2R2) × C). Monostable: T = ln3 × R × C ≈ 1.1 × R × C.

Ejemplos prácticos y casos límite

R1 1k, R2 10k, C 10n

Entrada
Astable
Salida
≈ 6.9 kHz, duty ≈ 52%

R 100k, C 10n

Entrada
Monostable
Salida
≈ 1.1 ms

Límites y notas de precisión

  • • Tolerance of the 555 and the components shifts the result by several percent.
  • • The standard astable circuit cannot give a duty cycle below 50%.

Procesamiento local en tu navegador y privacidad

Los conversores tradicionales suben tus documentos, textos o archivos multimedia a servidores remotos. Calculadora de Temporizador 555 (Astable y Monoestable) se ejecuta dentro de tu pestaña:

Procesado en esta pestaña

Tus textos y archivos se procesan localmente sin enviarse a ningún servidor externo.

Sin registro de tus archivos

Microdeck no guarda ni registra el contenido que introduces en las herramientas.

Memoria temporal de la pestaña

Los resultados permanecen en la memoria de tu navegador y se liberan al cerrar o reiniciar.

Preguntas frecuentes (FAQ)

How do I get a 50% duty cycle?

Add a diode in parallel with R2, or divide the output by two with a flip-flop.

Does it work for NE555, LM555 and the CMOS 7555?

Yes, the timing equations are the same.

Is anything stored?

No.

Explora herramientas relacionadas

Apoyar a Microdeck

Totalmente opcional · Desde $3 · Sin cuenta

Elige un importe (USD):Seleccionado:$5

El aporte mínimo es de $3 USD.

Totalmente opcional · Desde $3 · Pago seguro en Gumroad.