底層運作原理
Steps per mm is the number of microsteps for one motor turn divided by how far the axis moves in that turn. For a belt that is teeth times pitch; for a lead screw it is the screw lead. Enter your motor, microstepping and drive and copy the result into your firmware.
詳細操作步驟
Choose belt or lead screw.
Select the motor step angle and microstepping.
Enter pulley teeth and pitch, or the screw lead.
Copy steps per mm or the M92 command.
核心功能與效能優勢
- Belt and lead-screw drives
- 1.8° and 0.9° motors
- Microsteps 1 to 256
- Gear reduction for geared extruders
運算方法、公式與技術標準
Belt: (full steps × microsteps × gear) ÷ (teeth × pitch). Screw: (full steps × microsteps × gear) ÷ lead.
實作範例與邊界案例
GT2, 20 teeth, 1/16
1.8° motor
80 steps/mm
T8 lead 8 mm, 1/16
1.8° motor
400 steps/mm
使用限制與精準度說明
- • Assumes the driver really uses the microstepping you set.
- • Fractions are rounded by the firmware.
瀏覽器本地運算與隱私保障
傳統線上轉換網站會將您的文件、文字片段或影音檔案上傳至遠端伺服器。步進電機 Steps per mm 計算器 完全在您的瀏覽器分頁內運行:
您的檔案與文字都在裝置本機計算,不會傳送內容至任何後端伺服器。
Microdeck 不會記錄或儲存您在工具內貼上的任何檔案或程式碼。
所有暫存結果僅存在目前分頁記憶體中,重設或關閉分頁後即刻清除。
常見問題 (FAQ)
What is the lead of a screw?
Distance moved per turn; it is the thread pitch times the number of starts.
How do I set it?
Send M92 with your axis value, then M500 to save.
Is data uploaded?
No.