작동 원리 및 구조
Steps per mm is the number of microsteps for one motor turn divided by how far the axis moves in that turn. For a belt that is teeth times pitch; for a lead screw it is the screw lead. Enter your motor, microstepping and drive and copy the result into your firmware.
단계별 사용 방법
Choose belt or lead screw.
Select the motor step angle and microstepping.
Enter pulley teeth and pitch, or the screw lead.
Copy steps per mm or the M92 command.
주요 기능 및 장점
- Belt and lead-screw drives
- 1.8° and 0.9° motors
- Microsteps 1 to 256
- Gear reduction for geared extruders
계산 방식, 공식 및 기술 표준
Belt: (full steps × microsteps × gear) ÷ (teeth × pitch). Screw: (full steps × microsteps × gear) ÷ lead.
입출력 예시 및 엣지 케이스
GT2, 20 teeth, 1/16
1.8° motor
80 steps/mm
T8 lead 8 mm, 1/16
1.8° motor
400 steps/mm
제한 사항 및 정확도 안내
- • Assumes the driver really uses the microstepping you set.
- • Fractions are rounded by the firmware.
브라우저 로컬 처리 및 개인정보 보호
일반 웹 변환기는 문서나 미디어 파일을 원격 서버에 업로드합니다. 스테퍼 모터 Steps per mm 계산기 도구는 현재 브라우저 탭 내부에서만 실행됩니다:
입력 텍스트와 파일은 외부 서버로 전송되지 않고 기기 내에서 로컬로 계산됩니다.
도구에 붙여넣은 파일이나 데이터를 서버에 기록하거나 저장하지 않습니다.
작업 결과는 브라우저 탭 메모리에만 유지되며 탭을 닫거나 초기화하면 즉시 해제됩니다.
자주 묻는 질문 (FAQ)
What is the lead of a screw?
Distance moved per turn; it is the thread pitch times the number of starts.
How do I set it?
Send M92 with your axis value, then M500 to save.
Is data uploaded?
No.