Cara Kerja di Balik Layar
Steps per mm is the number of microsteps for one motor turn divided by how far the axis moves in that turn. For a belt that is teeth times pitch; for a lead screw it is the screw lead. Enter your motor, microstepping and drive and copy the result into your firmware.
Panduan Langkah demi Langkah
Choose belt or lead screw.
Select the motor step angle and microstepping.
Enter pulley teeth and pitch, or the screw lead.
Copy steps per mm or the M92 command.
Fitur Utama & Performa
- Belt and lead-screw drives
- 1.8° and 0.9° motors
- Microsteps 1 to 256
- Gear reduction for geared extruders
Metodologi, Rumus & Standar Teknis
Belt: (full steps × microsteps × gear) ÷ (teeth × pitch). Screw: (full steps × microsteps × gear) ÷ lead.
Contoh Kasus & Uji Coba
GT2, 20 teeth, 1/16
1.8° motor
80 steps/mm
T8 lead 8 mm, 1/16
1.8° motor
400 steps/mm
Catatan Batasan & Akurasi
- • Assumes the driver really uses the microstepping you set.
- • Fractions are rounded by the firmware.
Pemrosesan Lokal di Browser & Privasi
Konverter web konvensional mengunggah dokumen, teks, atau media ke server jarak jauh. Kalkulator Steps per mm Motor Stepper berjalan langsung di tab browser Anda:
Teks dan file Anda diproses secara lokal tanpa mengirim muatan apa pun ke server.
Microdeck tidak mencatat atau menyimpan file dan teks yang Anda masukkan ke ruang kerja alat.
Hasil kerja hanya tersimpan di memori tab dan langsung terhapus saat Anda me-reset atau menutup tab.
Pertanyaan yang Sering Diajukan (FAQ)
What is the lead of a screw?
Distance moved per turn; it is the thread pitch times the number of starts.
How do I set it?
Send M92 with your axis value, then M500 to save.
Is data uploaded?
No.
Jelajahi Alat Mikro Terkait
Kalkulator Kalibrasi E-Steps 3D Printer
Hitung nilai baru E-steps motor extruder dari panjang filamen hasil uji coba
Kalkulator Rasio Roda Gigi & Kecepatan RPM
Rasio reduksi total, kecepatan putaran output (RPM), dan torsi gear train bertingkat
Kalkulator Jarak Sumbu Pulley & Panjang Sabuk (Belt)
Hitung panjang timing belt atau jarak antar poros pulley, rasio putaran dan sudut kontak