Microdeck.tools 100 % en el navegador

Calculadora de Pasos por mm (Steps/mm) para Motores Paso a Paso

New

Calcula los steps por milímetro para configurar el firmware Marlin, Klipper o GRBL según micropasos y transmisión.

100 % en tu navegador Sin subir archivos Resultados al instante

¿Te ahorró tiempo esta herramienta? Ayuda a mantener Microdeck gratis y al día. Opcional · Desde $3.

Cómo funciona por dentro

Steps per mm is the number of microsteps for one motor turn divided by how far the axis moves in that turn. For a belt that is teeth times pitch; for a lead screw it is the screw lead. Enter your motor, microstepping and drive and copy the result into your firmware.

Instrucciones paso a paso

1

Choose belt or lead screw.

2

Select the motor step angle and microstepping.

3

Enter pulley teeth and pitch, or the screw lead.

4

Copy steps per mm or the M92 command.

Funciones principales y ventajas

  • Belt and lead-screw drives
  • 1.8° and 0.9° motors
  • Microsteps 1 to 256
  • Gear reduction for geared extruders

Metodología, fórmulas y estándares técnicos

Belt: (full steps × microsteps × gear) ÷ (teeth × pitch). Screw: (full steps × microsteps × gear) ÷ lead.

Ejemplos prácticos y casos límite

GT2, 20 teeth, 1/16

Entrada
1.8° motor
Salida
80 steps/mm

T8 lead 8 mm, 1/16

Entrada
1.8° motor
Salida
400 steps/mm

Límites y notas de precisión

  • • Assumes the driver really uses the microstepping you set.
  • • Fractions are rounded by the firmware.

Procesamiento local en tu navegador y privacidad

Los conversores tradicionales suben tus documentos, textos o archivos multimedia a servidores remotos. Calculadora de Pasos por mm (Steps/mm) para Motores Paso a Paso se ejecuta dentro de tu pestaña:

Procesado en esta pestaña

Tus textos y archivos se procesan localmente sin enviarse a ningún servidor externo.

Sin registro de tus archivos

Microdeck no guarda ni registra el contenido que introduces en las herramientas.

Memoria temporal de la pestaña

Los resultados permanecen en la memoria de tu navegador y se liberan al cerrar o reiniciar.

Preguntas frecuentes (FAQ)

What is the lead of a screw?

Distance moved per turn; it is the thread pitch times the number of starts.

How do I set it?

Send M92 with your axis value, then M500 to save.

Is data uploaded?

No.

Explora herramientas relacionadas

Apoyar a Microdeck

Totalmente opcional · Desde $3 · Sin cuenta

Elige un importe (USD):Seleccionado:$5

El aporte mínimo es de $3 USD.

Totalmente opcional · Desde $3 · Pago seguro en Gumroad.