Microdeck.tools 100% In-Browser

Stepper Motor Steps per mm Calculator

New

Calculate steps per millimetre from motor step angle, microstepping, pulley teeth and belt pitch or screw lead, with resolution and the M92 G-code.

100% In-Browser No Server Storage Instant Results

Did this tool save you time? Help keep Microdeck free and maintained. Completely optional · From $3.

How It Works Under the Hood

Steps per mm is the number of microsteps for one motor turn divided by how far the axis moves in that turn. For a belt that is teeth times pitch; for a lead screw it is the screw lead. Enter your motor, microstepping and drive and copy the result into your firmware.

Step-by-Step Instructions

1

Choose belt or lead screw.

2

Select the motor step angle and microstepping.

3

Enter pulley teeth and pitch, or the screw lead.

4

Copy steps per mm or the M92 command.

Key Features & Performance

  • Belt and lead-screw drives
  • 1.8° and 0.9° motors
  • Microsteps 1 to 256
  • Gear reduction for geared extruders

Methodology, Formulas & Technical Standards

Belt: (full steps × microsteps × gear) ÷ (teeth × pitch). Screw: (full steps × microsteps × gear) ÷ lead.

Worked Examples & Edge Cases

GT2, 20 teeth, 1/16

Input
1.8° motor
Output
80 steps/mm

T8 lead 8 mm, 1/16

Input
1.8° motor
Output
400 steps/mm

Limitations, Scope & Accuracy Notes

  • • Assumes the driver really uses the microstepping you set.
  • • Fractions are rounded by the firmware.

Local Browser Processing & Privacy

Traditional web converters upload your documents, snippets, or media files to remote servers. Stepper Motor Steps per mm Calculator runs inside your browser tab:

Processed in This Tab

Your input text and files are processed locally without uploading payloads to a processing server.

No Tool Payload Logging

Microdeck does not log or store the files or inputs you paste into tool workspaces (normal static hosting/CDN requests still load page assets).

Tab Memory Lifecycle

Working outputs stay in your browser tab and are released when you reset the tool or close the tab.

Frequently Asked Questions

What is the lead of a screw?

Distance moved per turn; it is the thread pitch times the number of starts.

How do I set it?

Send M92 with your axis value, then M500 to save.

Is data uploaded?

No.

Explore Related Micro-Tools

Support Microdeck

Completely optional · From $3 · No account required

Choose an amount (USD):Selected:$5

Minimum support amount is $3 USD.

Completely optional · From $3 · Checkout opens on Gumroad.