仕組みと内部処理
Steps per mm is the number of microsteps for one motor turn divided by how far the axis moves in that turn. For a belt that is teeth times pitch; for a lead screw it is the screw lead. Enter your motor, microstepping and drive and copy the result into your firmware.
使い方ステップ
Choose belt or lead screw.
Select the motor step angle and microstepping.
Enter pulley teeth and pitch, or the screw lead.
Copy steps per mm or the M92 command.
主な機能と特長
- Belt and lead-screw drives
- 1.8° and 0.9° motors
- Microsteps 1 to 256
- Gear reduction for geared extruders
計算ロジック・仕様・技術基準
Belt: (full steps × microsteps × gear) ÷ (teeth × pitch). Screw: (full steps × microsteps × gear) ÷ lead.
入出力の例・エッジケース
GT2, 20 teeth, 1/16
1.8° motor
80 steps/mm
T8 lead 8 mm, 1/16
1.8° motor
400 steps/mm
仕様上の制限・精度に関するご注意
- • Assumes the driver really uses the microstepping you set.
- • Fractions are rounded by the firmware.
ブラウザ内ローカル処理とプライバシー保護
一般的なWebツールは文書やメディアを外部サーバーへ送信します。ステッピングモーター steps/mm 計算機 はお使いのブラウザタブ内のみで完結します:
入力テキストやファイルは端末内で処理され、外部の処理サーバーへアップロードされません。
作業内容や貼り付けたデータを保存・記録しません(通常の静的配信CDNリクエストのみ発生します)。
作業データはタブ内のメモリ上のみに保持され、リセットまたはタブを閉じると破棄されます。
よくある質問 (FAQ)
What is the lead of a screw?
Distance moved per turn; it is the thread pitch times the number of starts.
How do I set it?
Send M92 with your axis value, then M500 to save.
Is data uploaded?
No.