底層運作原理
Panel watts = daily energy ÷ (peak sun hours × system efficiency). Battery energy = daily energy × days of autonomy ÷ depth of discharge, converted to amp-hours by the system voltage. The controller must handle the panel array current, so the tool divides panel watts by battery voltage and adds a 25% safety margin before choosing a standard rating.
詳細操作步驟
Enter your daily energy use in watt-hours.
Enter peak sun hours for your location and the overall system efficiency.
Set days of autonomy, depth of discharge and system voltage (12, 24 or 48 V).
Optionally enter the watts of the panel you plan to buy to get a panel count.
核心功能與效能優勢
- Panel, battery and controller in one pass
- Standard controller ratings such as 10, 20, 30, 40, 60 A
- Panel count for your chosen panel size
- Lead-acid or lithium depth of discharge
實作範例與邊界案例
Small cabin
1,200 Wh/day, 4.5 sun hours, 75% efficiency, 2 days, 50% DoD, 12 V
356 W of panels, 4,800 Wh (400 Ah) battery, 40 A controller
使用限制與精準度說明
- • Peak sun hours vary by month; size for the worst month if you need year-round power.
- • This is a planning estimate. Wire sizing, fusing, panel voltage limits of the controller and local code need a separate check.
瀏覽器本地運算與隱私保障
傳統線上轉換網站會將您的文件、文字片段或影音檔案上傳至遠端伺服器。太陽能板與充電控制器容量計算器 完全在您的瀏覽器分頁內運行:
您的檔案與文字都在裝置本機計算,不會傳送內容至任何後端伺服器。
Microdeck 不會記錄或儲存您在工具內貼上的任何檔案或程式碼。
所有暫存結果僅存在目前分頁記憶體中,重設或關閉分頁後即刻清除。
常見問題 (FAQ)
What are peak sun hours?
The equivalent hours per day of 1,000 W/m² sunlight. Most inhabited areas have 3 to 6.
What depth of discharge is safe?
About 50% for lead-acid and 80% or more for LiFePO4, following the battery maker datasheet.
MPPT or PWM?
MPPT harvests more from panels whose voltage is above the battery, at higher cost. For small 12 V systems with matched panels, PWM can be enough.