작동 원리 및 구조
Panel watts = daily energy ÷ (peak sun hours × system efficiency). Battery energy = daily energy × days of autonomy ÷ depth of discharge, converted to amp-hours by the system voltage. The controller must handle the panel array current, so the tool divides panel watts by battery voltage and adds a 25% safety margin before choosing a standard rating.
단계별 사용 방법
Enter your daily energy use in watt-hours.
Enter peak sun hours for your location and the overall system efficiency.
Set days of autonomy, depth of discharge and system voltage (12, 24 or 48 V).
Optionally enter the watts of the panel you plan to buy to get a panel count.
주요 기능 및 장점
- Panel, battery and controller in one pass
- Standard controller ratings such as 10, 20, 30, 40, 60 A
- Panel count for your chosen panel size
- Lead-acid or lithium depth of discharge
입출력 예시 및 엣지 케이스
Small cabin
1,200 Wh/day, 4.5 sun hours, 75% efficiency, 2 days, 50% DoD, 12 V
356 W of panels, 4,800 Wh (400 Ah) battery, 40 A controller
제한 사항 및 정확도 안내
- • Peak sun hours vary by month; size for the worst month if you need year-round power.
- • This is a planning estimate. Wire sizing, fusing, panel voltage limits of the controller and local code need a separate check.
브라우저 로컬 처리 및 개인정보 보호
일반 웹 변환기는 문서나 미디어 파일을 원격 서버에 업로드합니다. 태양광 패널·충전 컨트롤러 용량 계산기 도구는 현재 브라우저 탭 내부에서만 실행됩니다:
입력 텍스트와 파일은 외부 서버로 전송되지 않고 기기 내에서 로컬로 계산됩니다.
도구에 붙여넣은 파일이나 데이터를 서버에 기록하거나 저장하지 않습니다.
작업 결과는 브라우저 탭 메모리에만 유지되며 탭을 닫거나 초기화하면 즉시 해제됩니다.
자주 묻는 질문 (FAQ)
What are peak sun hours?
The equivalent hours per day of 1,000 W/m² sunlight. Most inhabited areas have 3 to 6.
What depth of discharge is safe?
About 50% for lead-acid and 80% or more for LiFePO4, following the battery maker datasheet.
MPPT or PWM?
MPPT harvests more from panels whose voltage is above the battery, at higher cost. For small 12 V systems with matched panels, PWM can be enough.