So funktioniert es unter der Haube
Panel watts = daily energy ÷ (peak sun hours × system efficiency). Battery energy = daily energy × days of autonomy ÷ depth of discharge, converted to amp-hours by the system voltage. The controller must handle the panel array current, so the tool divides panel watts by battery voltage and adds a 25% safety margin before choosing a standard rating.
Schritt-für-Schritt-Anleitung
Enter your daily energy use in watt-hours.
Enter peak sun hours for your location and the overall system efficiency.
Set days of autonomy, depth of discharge and system voltage (12, 24 or 48 V).
Optionally enter the watts of the panel you plan to buy to get a panel count.
Wichtige Funktionen & Vorteile
- Panel, battery and controller in one pass
- Standard controller ratings such as 10, 20, 30, 40, 60 A
- Panel count for your chosen panel size
- Lead-acid or lithium depth of discharge
Praxisbeispiele & Grenzfälle
Small cabin
1,200 Wh/day, 4.5 sun hours, 75% efficiency, 2 days, 50% DoD, 12 V
356 W of panels, 4,800 Wh (400 Ah) battery, 40 A controller
Hinweise zu Grenzen & Genauigkeit
- • Peak sun hours vary by month; size for the worst month if you need year-round power.
- • This is a planning estimate. Wire sizing, fusing, panel voltage limits of the controller and local code need a separate check.
Lokale Verarbeitung im Browser & Datenschutz
Herkömmliche Online-Konverter laden Ihre Dokumente, Texte oder Mediendateien auf fremde Server. Solarmodul- & Laderegler-Dimensionierung läuft direkt in Ihrem Browser-Tab:
Ihre Texte und Dateien werden lokal berechnet, ohne Inhalte an einen Verarbeitungsserver zu senden.
Microdeck protokolliert oder speichert weder Ihre Dateien noch Texteingaben (normale CDN-Abrufe laden lediglich die statische Seite).
Arbeitsergebnisse bleiben ausschließlich im Arbeitsspeicher des Tabs und werden beim Zurücksetzen oder Schließen freigegeben.
Häufig gestellte Fragen (FAQ)
What are peak sun hours?
The equivalent hours per day of 1,000 W/m² sunlight. Most inhabited areas have 3 to 6.
What depth of discharge is safe?
About 50% for lead-acid and 80% or more for LiFePO4, following the battery maker datasheet.
MPPT or PWM?
MPPT harvests more from panels whose voltage is above the battery, at higher cost. For small 12 V systems with matched panels, PWM can be enough.
Ähnliche Mikro-Tools entdecken
Akkulaufzeit-Rechner
Wie lange hält ein Akku? Aus Kapazität, nutzbarem Anteil und Last, auch mit Tastverhältnis
Leitungsquerschnitt (AWG) & Spannungsabfall
Drahtgröße für Strom und Länge wählen oder den Spannungsabfall prüfen
Ohmsches Gesetz & Leistung berechnen
Zwei von Spannung, Strom, Widerstand und Leistung eingeben, die anderen zwei erhalten