仕組みと内部処理
Panel watts = daily energy ÷ (peak sun hours × system efficiency). Battery energy = daily energy × days of autonomy ÷ depth of discharge, converted to amp-hours by the system voltage. The controller must handle the panel array current, so the tool divides panel watts by battery voltage and adds a 25% safety margin before choosing a standard rating.
使い方ステップ
Enter your daily energy use in watt-hours.
Enter peak sun hours for your location and the overall system efficiency.
Set days of autonomy, depth of discharge and system voltage (12, 24 or 48 V).
Optionally enter the watts of the panel you plan to buy to get a panel count.
主な機能と特長
- Panel, battery and controller in one pass
- Standard controller ratings such as 10, 20, 30, 40, 60 A
- Panel count for your chosen panel size
- Lead-acid or lithium depth of discharge
入出力の例・エッジケース
Small cabin
1,200 Wh/day, 4.5 sun hours, 75% efficiency, 2 days, 50% DoD, 12 V
356 W of panels, 4,800 Wh (400 Ah) battery, 40 A controller
仕様上の制限・精度に関するご注意
- • Peak sun hours vary by month; size for the worst month if you need year-round power.
- • This is a planning estimate. Wire sizing, fusing, panel voltage limits of the controller and local code need a separate check.
ブラウザ内ローカル処理とプライバシー保護
一般的なWebツールは文書やメディアを外部サーバーへ送信します。ソーラーパネル・チャージコントローラー容量計算機 はお使いのブラウザタブ内のみで完結します:
入力テキストやファイルは端末内で処理され、外部の処理サーバーへアップロードされません。
作業内容や貼り付けたデータを保存・記録しません(通常の静的配信CDNリクエストのみ発生します)。
作業データはタブ内のメモリ上のみに保持され、リセットまたはタブを閉じると破棄されます。
よくある質問 (FAQ)
What are peak sun hours?
The equivalent hours per day of 1,000 W/m² sunlight. Most inhabited areas have 3 to 6.
What depth of discharge is safe?
About 50% for lead-acid and 80% or more for LiFePO4, following the battery maker datasheet.
MPPT or PWM?
MPPT harvests more from panels whose voltage is above the battery, at higher cost. For small 12 V systems with matched panels, PWM can be enough.