Como funciona por dentro
Panel watts = daily energy ÷ (peak sun hours × system efficiency). Battery energy = daily energy × days of autonomy ÷ depth of discharge, converted to amp-hours by the system voltage. The controller must handle the panel array current, so the tool divides panel watts by battery voltage and adds a 25% safety margin before choosing a standard rating.
Passo a passo de uso
Enter your daily energy use in watt-hours.
Enter peak sun hours for your location and the overall system efficiency.
Set days of autonomy, depth of discharge and system voltage (12, 24 or 48 V).
Optionally enter the watts of the panel you plan to buy to get a panel count.
Principais recursos e vantagens
- Panel, battery and controller in one pass
- Standard controller ratings such as 10, 20, 30, 40, 60 A
- Panel count for your chosen panel size
- Lead-acid or lithium depth of discharge
Exemplos resolvidos e casos especiais
Small cabin
1,200 Wh/day, 4.5 sun hours, 75% efficiency, 2 days, 50% DoD, 12 V
356 W of panels, 4,800 Wh (400 Ah) battery, 40 A controller
Limitações e notas de precisão
- • Peak sun hours vary by month; size for the worst month if you need year-round power.
- • This is a planning estimate. Wire sizing, fusing, panel voltage limits of the controller and local code need a separate check.
Processamento local no navegador e privacidade
Conversores comuns enviam seus documentos, códigos ou vídeos para servidores externos. O Dimensionamento de painel solar e controlador de carga roda direto na sua aba:
Seus textos e arquivos são processados localmente sem enviar conteúdo para servidores.
O Microdeck não registra nem armazena arquivos ou dados colados nas ferramentas.
Os resultados ficam apenas na memória do navegador e somem ao fechar ou limpar a aba.
Perguntas frequentes (FAQ)
What are peak sun hours?
The equivalent hours per day of 1,000 W/m² sunlight. Most inhabited areas have 3 to 6.
What depth of discharge is safe?
About 50% for lead-acid and 80% or more for LiFePO4, following the battery maker datasheet.
MPPT or PWM?
MPPT harvests more from panels whose voltage is above the battery, at higher cost. For small 12 V systems with matched panels, PWM can be enough.
Outras ferramentas relacionadas
Estimador de duração de bateria
Quanto tempo dura uma bateria? Com capacidade, parte utilizável, carga e ciclo de trabalho
Bitola de fio (AWG) e queda de tensão
Escolha o fio pela corrente e comprimento, ou verifique a queda de tensão
Calculadora da lei de Ohm e potência
Informe duas entre tensão, corrente, resistência e potência e obtenha as outras duas