Microdeck.tools 100% 瀏覽器本地執行

氣壓缸推力與耗氣量計算器

New

根據氣缸缸徑 (Bore)、活塞桿徑與工作壓力,計算雙作用氣缸的前進出力、後退出力,並估算連續往復運動時的空壓機耗氣量 (NL/min)。

100% 瀏覽器本地執行 不上傳至伺服器 即時顯示結果

這個工具替您省下寶貴時間了嗎? 歡迎自願贊助,協助 Microdeck 維持免費與穩定運作 · 最低 $3 起。

底層運作原理

Force is pressure times piston area, reduced by an efficiency factor for friction. The pull force is lower because the rod takes up part of the area. Air use is the swept volume of both strokes multiplied by the compression ratio, which converts it to free air for sizing a compressor.

詳細操作步驟

1

Enter bore, rod, stroke and working pressure.

2

Set the efficiency and cycles per minute.

3

Read push and pull force and the air consumption.

核心功能與效能優勢

  • bar, psi, MPa and kPa
  • Push and pull force in N and kgf
  • Free air per cycle and per minute
  • Compressor delivery with 30% margin

運算方法、公式與技術標準

F = P × A × η. Free air = swept volume × (P + 1.013) ÷ 1.013.

實作範例與邊界案例

50 mm bore at 6 bar

輸入
Rod 20 mm
輸出
Push ≈ 1060 N

使用限制與精準度說明

  • • Ignores dead volume in tubes and valves.
  • • Add a safety factor of 1.5–2 for the load.

瀏覽器本地運算與隱私保障

傳統線上轉換網站會將您的文件、文字片段或影音檔案上傳至遠端伺服器。氣壓缸推力與耗氣量計算器 完全在您的瀏覽器分頁內運行:

於此分頁本地處理

您的檔案與文字都在裝置本機計算,不會傳送內容至任何後端伺服器。

絕不記錄操作內容

Microdeck 不會記錄或儲存您在工具內貼上的任何檔案或程式碼。

分頁記憶體即時釋放

所有暫存結果僅存在目前分頁記憶體中,重設或關閉分頁後即刻清除。

常見問題 (FAQ)

Why is the pull force smaller?

The rod reduces the effective piston area on the retract side.

What is free air?

Air volume at atmospheric pressure, the unit compressors are rated in.

Is anything uploaded?

No.

探索相關微型工具

支持 Microdeck

完全自願 · $3 起 · 免註冊帳號

選擇金額 (USD):已選金額:$5

單次最低贊助金額為 $3 USD。

完全自願 · $3 起 · 將透過 Gumroad 安全結帳頁面完成。