How It Works Under the Hood
Force is pressure times piston area, reduced by an efficiency factor for friction. The pull force is lower because the rod takes up part of the area. Air use is the swept volume of both strokes multiplied by the compression ratio, which converts it to free air for sizing a compressor.
Step-by-Step Instructions
Enter bore, rod, stroke and working pressure.
Set the efficiency and cycles per minute.
Read push and pull force and the air consumption.
Key Features & Performance
- bar, psi, MPa and kPa
- Push and pull force in N and kgf
- Free air per cycle and per minute
- Compressor delivery with 30% margin
Methodology, Formulas & Technical Standards
F = P × A × η. Free air = swept volume × (P + 1.013) ÷ 1.013.
Worked Examples & Edge Cases
50 mm bore at 6 bar
Rod 20 mm
Push ≈ 1060 N
Limitations, Scope & Accuracy Notes
- • Ignores dead volume in tubes and valves.
- • Add a safety factor of 1.5–2 for the load.
Local Browser Processing & Privacy
Traditional web converters upload your documents, snippets, or media files to remote servers. Pneumatic Cylinder Force & Air Consumption Calculator runs inside your browser tab:
Your input text and files are processed locally without uploading payloads to a processing server.
Microdeck does not log or store the files or inputs you paste into tool workspaces (normal static hosting/CDN requests still load page assets).
Working outputs stay in your browser tab and are released when you reset the tool or close the tab.
Frequently Asked Questions
Why is the pull force smaller?
The rod reduces the effective piston area on the retract side.
What is free air?
Air volume at atmospheric pressure, the unit compressors are rated in.
Is anything uploaded?
No.
Explore Related Micro-Tools
Air Compressor Tank Fill Time Calculator
How long a compressor takes to pump a tank up to pressure
Tank Volume Calculator (Cylindrical, Rectangular, Cone)
Capacity and liquid content of tanks, drums and cones, in litres and gallons
Water Pump Head & Horsepower Calculator
Total dynamic head, shaft power and the motor size for a pump