Cara Kerja di Balik Layar
Force is pressure times piston area, reduced by an efficiency factor for friction. The pull force is lower because the rod takes up part of the area. Air use is the swept volume of both strokes multiplied by the compression ratio, which converts it to free air for sizing a compressor.
Panduan Langkah demi Langkah
Enter bore, rod, stroke and working pressure.
Set the efficiency and cycles per minute.
Read push and pull force and the air consumption.
Fitur Utama & Performa
- bar, psi, MPa and kPa
- Push and pull force in N and kgf
- Free air per cycle and per minute
- Compressor delivery with 30% margin
Metodologi, Rumus & Standar Teknis
F = P × A × η. Free air = swept volume × (P + 1.013) ÷ 1.013.
Contoh Kasus & Uji Coba
50 mm bore at 6 bar
Rod 20 mm
Push ≈ 1060 N
Catatan Batasan & Akurasi
- • Ignores dead volume in tubes and valves.
- • Add a safety factor of 1.5–2 for the load.
Pemrosesan Lokal di Browser & Privasi
Konverter web konvensional mengunggah dokumen, teks, atau media ke server jarak jauh. Kalkulator Gaya Silinder Pneumatik & Konsumsi Udara berjalan langsung di tab browser Anda:
Teks dan file Anda diproses secara lokal tanpa mengirim muatan apa pun ke server.
Microdeck tidak mencatat atau menyimpan file dan teks yang Anda masukkan ke ruang kerja alat.
Hasil kerja hanya tersimpan di memori tab dan langsung terhapus saat Anda me-reset atau menutup tab.
Pertanyaan yang Sering Diajukan (FAQ)
Why is the pull force smaller?
The rod reduces the effective piston area on the retract side.
What is free air?
Air volume at atmospheric pressure, the unit compressors are rated in.
Is anything uploaded?
No.
Jelajahi Alat Mikro Terkait
Kalkulator Waktu Pengisian Tangki Kompresor Angin
Hitung durasi pengisian tabung kompresor atau hitung debit aliran riil (FAD/CFM)
Kalkulator Volume Tangki & Kapasitas Cairan
Hitung kapasitas total dan volume cairan tersisa pada tangki silinder vertikal, horizontal, dan kotak
Kalkulator Total Head & Daya Pompa Air (HP / kW)
Hitung total dynamic head (TDH), daya hidrolik, dan daya motor pompa