So funktioniert es unter der Haube
Force is pressure times piston area, reduced by an efficiency factor for friction. The pull force is lower because the rod takes up part of the area. Air use is the swept volume of both strokes multiplied by the compression ratio, which converts it to free air for sizing a compressor.
Schritt-für-Schritt-Anleitung
Enter bore, rod, stroke and working pressure.
Set the efficiency and cycles per minute.
Read push and pull force and the air consumption.
Wichtige Funktionen & Vorteile
- bar, psi, MPa and kPa
- Push and pull force in N and kgf
- Free air per cycle and per minute
- Compressor delivery with 30% margin
Methodik, Formeln & technische Standards
F = P × A × η. Free air = swept volume × (P + 1.013) ÷ 1.013.
Praxisbeispiele & Grenzfälle
50 mm bore at 6 bar
Rod 20 mm
Push ≈ 1060 N
Hinweise zu Grenzen & Genauigkeit
- • Ignores dead volume in tubes and valves.
- • Add a safety factor of 1.5–2 for the load.
Lokale Verarbeitung im Browser & Datenschutz
Herkömmliche Online-Konverter laden Ihre Dokumente, Texte oder Mediendateien auf fremde Server. Pneumatikzylinder-Kraft- und Luftverbrauchs-Rechner läuft direkt in Ihrem Browser-Tab:
Ihre Texte und Dateien werden lokal berechnet, ohne Inhalte an einen Verarbeitungsserver zu senden.
Microdeck protokolliert oder speichert weder Ihre Dateien noch Texteingaben (normale CDN-Abrufe laden lediglich die statische Seite).
Arbeitsergebnisse bleiben ausschließlich im Arbeitsspeicher des Tabs und werden beim Zurücksetzen oder Schließen freigegeben.
Häufig gestellte Fragen (FAQ)
Why is the pull force smaller?
The rod reduces the effective piston area on the retract side.
What is free air?
Air volume at atmospheric pressure, the unit compressors are rated in.
Is anything uploaded?
No.
Ähnliche Mikro-Tools entdecken
Kompressor-Kesselfüllzeit- und Durchflussrechner
Füllzeit des Druckluftkessels berechnen oder effektive Liefermenge (FAD) ermitteln
Tankvolumen- und Füllstandsrechner
Gesamtvolumen und aktuellen Flüssigkeitsstand für zylindrische, liegende & eckige Tanks berechnen
Wasserpumpen-Förderhöhe- und Leistungsrechner
Gesamtförderhöhe (TDH), hydraulische Leistung und Motorleistung (kW/PS) berechnen