仕組みと内部処理
Force is pressure times piston area, reduced by an efficiency factor for friction. The pull force is lower because the rod takes up part of the area. Air use is the swept volume of both strokes multiplied by the compression ratio, which converts it to free air for sizing a compressor.
使い方ステップ
Enter bore, rod, stroke and working pressure.
Set the efficiency and cycles per minute.
Read push and pull force and the air consumption.
主な機能と特長
- bar, psi, MPa and kPa
- Push and pull force in N and kgf
- Free air per cycle and per minute
- Compressor delivery with 30% margin
計算ロジック・仕様・技術基準
F = P × A × η. Free air = swept volume × (P + 1.013) ÷ 1.013.
入出力の例・エッジケース
50 mm bore at 6 bar
Rod 20 mm
Push ≈ 1060 N
仕様上の制限・精度に関するご注意
- • Ignores dead volume in tubes and valves.
- • Add a safety factor of 1.5–2 for the load.
ブラウザ内ローカル処理とプライバシー保護
一般的なWebツールは文書やメディアを外部サーバーへ送信します。エアシリンダ推力・空気消費量計算機 はお使いのブラウザタブ内のみで完結します:
入力テキストやファイルは端末内で処理され、外部の処理サーバーへアップロードされません。
作業内容や貼り付けたデータを保存・記録しません(通常の静的配信CDNリクエストのみ発生します)。
作業データはタブ内のメモリ上のみに保持され、リセットまたはタブを閉じると破棄されます。
よくある質問 (FAQ)
Why is the pull force smaller?
The rod reduces the effective piston area on the retract side.
What is free air?
Air volume at atmospheric pressure, the unit compressors are rated in.
Is anything uploaded?
No.