Microdeck.tools 100% 瀏覽器本地執行

NTC 熱敏電阻計算器

New

根據 NTC 負溫度係數熱敏電阻的基準阻值 R25 與 B 值參數,即時將實測阻值轉換為溫度,或計算指定溫度下的理論阻值。

100% 瀏覽器本地執行 不上傳至伺服器 即時顯示結果

這個工具替您省下寶貴時間了嗎? 歡迎自願贊助,協助 Microdeck 維持免費與穩定運作 · 最低 $3 起。

底層運作原理

The beta model relates NTC resistance to temperature: 1/T = 1/T0 + ln(R/R0) / B. Enter R0 at 25 °C (for example 10 kΩ) and the beta value, then convert a measured resistance to a temperature, a temperature to a resistance, or an ADC count from a divider with a fixed resistor.

詳細操作步驟

1

Enter R0 and the beta value from the datasheet.

2

Pick the conversion.

3

Enter the resistance, temperature or ADC reading.

4

Read the result and the resistance table.

核心功能與效能優勢

  • Resistance ↔ temperature
  • ADC divider reading to temperature
  • °C and °F
  • Resistance table from −20 to 100 °C

運算方法、公式與技術標準

1/T = 1/T0 + (1/B)·ln(R/R0), T in kelvin. Divider: R = Rs·Vout / (Vcc − Vout).

實作範例與邊界案例

10 kΩ, B 3950, 8 kΩ measured

輸入
Beta model
輸出
≈ 30 °C

使用限制與精準度說明

  • • Accurate near 25 °C; use Steinhart–Hart over wide ranges.
  • • Self-heating and ADC noise affect real readings.

瀏覽器本地運算與隱私保障

傳統線上轉換網站會將您的文件、文字片段或影音檔案上傳至遠端伺服器。NTC 熱敏電阻計算器 完全在您的瀏覽器分頁內運行:

於此分頁本地處理

您的檔案與文字都在裝置本機計算,不會傳送內容至任何後端伺服器。

絕不記錄操作內容

Microdeck 不會記錄或儲存您在工具內貼上的任何檔案或程式碼。

分頁記憶體即時釋放

所有暫存結果僅存在目前分頁記憶體中,重設或關閉分頁後即刻清除。

常見問題 (FAQ)

Where is the beta value?

In the thermistor datasheet, often B25/50 or B25/85.

Which side of the divider is the NTC?

The tool assumes the NTC to ground and the fixed resistor to the supply.

Is anything uploaded?

No.

探索相關微型工具

支持 Microdeck

完全自願 · $3 起 · 免註冊帳號

選擇金額 (USD):已選金額:$5

單次最低贊助金額為 $3 USD。

完全自願 · $3 起 · 將透過 Gumroad 安全結帳頁面完成。