仕組みと内部処理
The beta model relates NTC resistance to temperature: 1/T = 1/T0 + ln(R/R0) / B. Enter R0 at 25 °C (for example 10 kΩ) and the beta value, then convert a measured resistance to a temperature, a temperature to a resistance, or an ADC count from a divider with a fixed resistor.
使い方ステップ
Enter R0 and the beta value from the datasheet.
Pick the conversion.
Enter the resistance, temperature or ADC reading.
Read the result and the resistance table.
主な機能と特長
- Resistance ↔ temperature
- ADC divider reading to temperature
- °C and °F
- Resistance table from −20 to 100 °C
計算ロジック・仕様・技術基準
1/T = 1/T0 + (1/B)·ln(R/R0), T in kelvin. Divider: R = Rs·Vout / (Vcc − Vout).
入出力の例・エッジケース
10 kΩ, B 3950, 8 kΩ measured
Beta model
≈ 30 °C
仕様上の制限・精度に関するご注意
- • Accurate near 25 °C; use Steinhart–Hart over wide ranges.
- • Self-heating and ADC noise affect real readings.
ブラウザ内ローカル処理とプライバシー保護
一般的なWebツールは文書やメディアを外部サーバーへ送信します。NTCサーミスタ温度計算機 はお使いのブラウザタブ内のみで完結します:
入力テキストやファイルは端末内で処理され、外部の処理サーバーへアップロードされません。
作業内容や貼り付けたデータを保存・記録しません(通常の静的配信CDNリクエストのみ発生します)。
作業データはタブ内のメモリ上のみに保持され、リセットまたはタブを閉じると破棄されます。
よくある質問 (FAQ)
Where is the beta value?
In the thermistor datasheet, often B25/50 or B25/85.
Which side of the divider is the NTC?
The tool assumes the NTC to ground and the fixed resistor to the supply.
Is anything uploaded?
No.