Microdeck.tools 100% di Browser

Kalkulator Termistor NTC

New

Ubah resistansi ohm sensor termistor NTC ke derajat Celsius/Fahrenheit atau hitung nilai ohm pada suhu target dengan nilai B.

100% di Browser Tanpa Upload Server Hasil Instan

Apakah alat ini menghemat waktu Anda? Bantu jaga Microdeck tetap gratis dan terawat. Sepenuhnya sukarela · Mulai $3.

Cara Kerja di Balik Layar

The beta model relates NTC resistance to temperature: 1/T = 1/T0 + ln(R/R0) / B. Enter R0 at 25 °C (for example 10 kΩ) and the beta value, then convert a measured resistance to a temperature, a temperature to a resistance, or an ADC count from a divider with a fixed resistor.

Panduan Langkah demi Langkah

1

Enter R0 and the beta value from the datasheet.

2

Pick the conversion.

3

Enter the resistance, temperature or ADC reading.

4

Read the result and the resistance table.

Fitur Utama & Performa

  • Resistance ↔ temperature
  • ADC divider reading to temperature
  • °C and °F
  • Resistance table from −20 to 100 °C

Metodologi, Rumus & Standar Teknis

1/T = 1/T0 + (1/B)·ln(R/R0), T in kelvin. Divider: R = Rs·Vout / (Vcc − Vout).

Contoh Kasus & Uji Coba

10 kΩ, B 3950, 8 kΩ measured

Input
Beta model
Output
≈ 30 °C

Catatan Batasan & Akurasi

  • • Accurate near 25 °C; use Steinhart–Hart over wide ranges.
  • • Self-heating and ADC noise affect real readings.

Pemrosesan Lokal di Browser & Privasi

Konverter web konvensional mengunggah dokumen, teks, atau media ke server jarak jauh. Kalkulator Termistor NTC berjalan langsung di tab browser Anda:

Diproses di Tab Ini

Teks dan file Anda diproses secara lokal tanpa mengirim muatan apa pun ke server.

Tanpa Pencatatan Input

Microdeck tidak mencatat atau menyimpan file dan teks yang Anda masukkan ke ruang kerja alat.

Memori Tab Sementara

Hasil kerja hanya tersimpan di memori tab dan langsung terhapus saat Anda me-reset atau menutup tab.

Pertanyaan yang Sering Diajukan (FAQ)

Where is the beta value?

In the thermistor datasheet, often B25/50 or B25/85.

Which side of the divider is the NTC?

The tool assumes the NTC to ground and the fixed resistor to the supply.

Is anything uploaded?

No.

Jelajahi Alat Mikro Terkait

Dukung Microdeck

Sepenuhnya sukarela · Mulai $3 · Tanpa akun

Pilih jumlah (USD):Dipilih:$5

Jumlah dukungan minimum adalah $3 USD.

Sepenuhnya sukarela · Mulai $3 · Pembayaran aman melalui Gumroad.