How It Works Under the Hood
The beta model relates NTC resistance to temperature: 1/T = 1/T0 + ln(R/R0) / B. Enter R0 at 25 °C (for example 10 kΩ) and the beta value, then convert a measured resistance to a temperature, a temperature to a resistance, or an ADC count from a divider with a fixed resistor.
Step-by-Step Instructions
Enter R0 and the beta value from the datasheet.
Pick the conversion.
Enter the resistance, temperature or ADC reading.
Read the result and the resistance table.
Key Features & Performance
- Resistance ↔ temperature
- ADC divider reading to temperature
- °C and °F
- Resistance table from −20 to 100 °C
Methodology, Formulas & Technical Standards
1/T = 1/T0 + (1/B)·ln(R/R0), T in kelvin. Divider: R = Rs·Vout / (Vcc − Vout).
Worked Examples & Edge Cases
10 kΩ, B 3950, 8 kΩ measured
Beta model
≈ 30 °C
Limitations, Scope & Accuracy Notes
- • Accurate near 25 °C; use Steinhart–Hart over wide ranges.
- • Self-heating and ADC noise affect real readings.
Local Browser Processing & Privacy
Traditional web converters upload your documents, snippets, or media files to remote servers. NTC Thermistor Calculator (Beta Value) runs inside your browser tab:
Your input text and files are processed locally without uploading payloads to a processing server.
Microdeck does not log or store the files or inputs you paste into tool workspaces (normal static hosting/CDN requests still load page assets).
Working outputs stay in your browser tab and are released when you reset the tool or close the tab.
Frequently Asked Questions
Where is the beta value?
In the thermistor datasheet, often B25/50 or B25/85.
Which side of the divider is the NTC?
The tool assumes the NTC to ground and the fixed resistor to the supply.
Is anything uploaded?
No.
Explore Related Micro-Tools
Voltage Divider Calculator
Output voltage from two resistors, or the R2 needed for a target voltage, with load effect
Strain Gauge Wheatstone Bridge Calculator
Bridge output voltage for a strain, or the strain from a measured voltage
Ohm's Law & Power Calculator
Enter any two of voltage, current, resistance or power and get the other two