작동 원리 및 구조
The beta model relates NTC resistance to temperature: 1/T = 1/T0 + ln(R/R0) / B. Enter R0 at 25 °C (for example 10 kΩ) and the beta value, then convert a measured resistance to a temperature, a temperature to a resistance, or an ADC count from a divider with a fixed resistor.
단계별 사용 방법
Enter R0 and the beta value from the datasheet.
Pick the conversion.
Enter the resistance, temperature or ADC reading.
Read the result and the resistance table.
주요 기능 및 장점
- Resistance ↔ temperature
- ADC divider reading to temperature
- °C and °F
- Resistance table from −20 to 100 °C
계산 방식, 공식 및 기술 표준
1/T = 1/T0 + (1/B)·ln(R/R0), T in kelvin. Divider: R = Rs·Vout / (Vcc − Vout).
입출력 예시 및 엣지 케이스
10 kΩ, B 3950, 8 kΩ measured
Beta model
≈ 30 °C
제한 사항 및 정확도 안내
- • Accurate near 25 °C; use Steinhart–Hart over wide ranges.
- • Self-heating and ADC noise affect real readings.
브라우저 로컬 처리 및 개인정보 보호
일반 웹 변환기는 문서나 미디어 파일을 원격 서버에 업로드합니다. NTC 서미스터 온도 계산기 도구는 현재 브라우저 탭 내부에서만 실행됩니다:
입력 텍스트와 파일은 외부 서버로 전송되지 않고 기기 내에서 로컬로 계산됩니다.
도구에 붙여넣은 파일이나 데이터를 서버에 기록하거나 저장하지 않습니다.
작업 결과는 브라우저 탭 메모리에만 유지되며 탭을 닫거나 초기화하면 즉시 해제됩니다.
자주 묻는 질문 (FAQ)
Where is the beta value?
In the thermistor datasheet, often B25/50 or B25/85.
Which side of the divider is the NTC?
The tool assumes the NTC to ground and the fixed resistor to the supply.
Is anything uploaded?
No.