Cómo funciona por dentro
The beta model relates NTC resistance to temperature: 1/T = 1/T0 + ln(R/R0) / B. Enter R0 at 25 °C (for example 10 kΩ) and the beta value, then convert a measured resistance to a temperature, a temperature to a resistance, or an ADC count from a divider with a fixed resistor.
Instrucciones paso a paso
Enter R0 and the beta value from the datasheet.
Pick the conversion.
Enter the resistance, temperature or ADC reading.
Read the result and the resistance table.
Funciones principales y ventajas
- Resistance ↔ temperature
- ADC divider reading to temperature
- °C and °F
- Resistance table from −20 to 100 °C
Metodología, fórmulas y estándares técnicos
1/T = 1/T0 + (1/B)·ln(R/R0), T in kelvin. Divider: R = Rs·Vout / (Vcc − Vout).
Ejemplos prácticos y casos límite
10 kΩ, B 3950, 8 kΩ measured
Beta model
≈ 30 °C
Límites y notas de precisión
- • Accurate near 25 °C; use Steinhart–Hart over wide ranges.
- • Self-heating and ADC noise affect real readings.
Procesamiento local en tu navegador y privacidad
Los conversores tradicionales suben tus documentos, textos o archivos multimedia a servidores remotos. Calculadora de Termistor NTC se ejecuta dentro de tu pestaña:
Tus textos y archivos se procesan localmente sin enviarse a ningún servidor externo.
Microdeck no guarda ni registra el contenido que introduces en las herramientas.
Los resultados permanecen en la memoria de tu navegador y se liberan al cerrar o reiniciar.
Preguntas frecuentes (FAQ)
Where is the beta value?
In the thermistor datasheet, often B25/50 or B25/85.
Which side of the divider is the NTC?
The tool assumes the NTC to ground and the fixed resistor to the supply.
Is anything uploaded?
No.
Explora herramientas relacionadas
Calculadora de divisor de tensión
Tensión de salida con dos resistencias, o R2 para una tensión objetivo, con efecto de carga
Calculadora de Puente de Wheatstone (Galgas y Celdas de Carga)
Calcula voltaje de salida (mV/V) para puente cuarto, medio y completo
Calculadora de ley de Ohm y potencia
Introduzca dos de tensión, corriente, resistencia o potencia y obtenga las otras dos