Microdeck.tools 100% 瀏覽器本地執行

3D 列印機 E-Steps 擠出機校準計算器

New

徹底解決 3D 列印欠擠出(出料不足)或過擠出問題,輸入目前 E-steps 及實測擠出長度,即可產生新 M92 E 參數與存儲代碼。

100% 瀏覽器本地執行 不上傳至伺服器 即時顯示結果

這個工具替您省下寶貴時間了嗎? 歡迎自願贊助,協助 Microdeck 維持免費與穩定運作 · 最低 $3 起。

底層運作原理

Mark the filament, extrude a known length and measure how much actually went in. The new E-steps value is the old value times the requested length divided by the real length. The tool also reports the error and the G-code to apply and save the value.

詳細操作步驟

1

Mark the filament 120 mm above the extruder.

2

Extrude 100 mm at printing temperature.

3

Measure the new distance to the mark.

4

Enter the numbers and apply the new E-steps.

核心功能與效能優勢

  • Error percentage
  • M92 and M500 commands
  • Warning for large errors

運算方法、公式與技術標準

New E-steps = current × requested ÷ actual.

實作範例與邊界案例

97 mm instead of 100 mm

輸入
Current 93
輸出
New ≈ 95.9

使用限制與精準度說明

  • • Mechanical problems such as slipping give meaningless results.
  • • Do E-steps first and flow rate second.

瀏覽器本地運算與隱私保障

傳統線上轉換網站會將您的文件、文字片段或影音檔案上傳至遠端伺服器。3D 列印機 E-Steps 擠出機校準計算器 完全在您的瀏覽器分頁內運行:

於此分頁本地處理

您的檔案與文字都在裝置本機計算,不會傳送內容至任何後端伺服器。

絕不記錄操作內容

Microdeck 不會記錄或儲存您在工具內貼上的任何檔案或程式碼。

分頁記憶體即時釋放

所有暫存結果僅存在目前分頁記憶體中,重設或關閉分頁後即刻清除。

常見問題 (FAQ)

How accurate must the measurement be?

Within about 0.5 mm; repeat the test to confirm.

Do I need to save it?

Yes, send M500 after M92.

Is data uploaded?

No.

探索相關微型工具

支持 Microdeck

完全自願 · $3 起 · 免註冊帳號

選擇金額 (USD):已選金額:$5

單次最低贊助金額為 $3 USD。

完全自願 · $3 起 · 將透過 Gumroad 安全結帳頁面完成。