Microdeck.tools 100% di Browser

Kalkulator Kalibrasi E-Steps 3D Printer

New

Atasi masalah under-extrusion atau over-extrusion dengan menghitung nilai baru steps/mm extruder dari uji ekstrusi 100 mm.

100% di Browser Tanpa Upload Server Hasil Instan

Apakah alat ini menghemat waktu Anda? Bantu jaga Microdeck tetap gratis dan terawat. Sepenuhnya sukarela · Mulai $3.

Cara Kerja di Balik Layar

Mark the filament, extrude a known length and measure how much actually went in. The new E-steps value is the old value times the requested length divided by the real length. The tool also reports the error and the G-code to apply and save the value.

Panduan Langkah demi Langkah

1

Mark the filament 120 mm above the extruder.

2

Extrude 100 mm at printing temperature.

3

Measure the new distance to the mark.

4

Enter the numbers and apply the new E-steps.

Fitur Utama & Performa

  • Error percentage
  • M92 and M500 commands
  • Warning for large errors

Metodologi, Rumus & Standar Teknis

New E-steps = current × requested ÷ actual.

Contoh Kasus & Uji Coba

97 mm instead of 100 mm

Input
Current 93
Output
New ≈ 95.9

Catatan Batasan & Akurasi

  • • Mechanical problems such as slipping give meaningless results.
  • • Do E-steps first and flow rate second.

Pemrosesan Lokal di Browser & Privasi

Konverter web konvensional mengunggah dokumen, teks, atau media ke server jarak jauh. Kalkulator Kalibrasi E-Steps 3D Printer berjalan langsung di tab browser Anda:

Diproses di Tab Ini

Teks dan file Anda diproses secara lokal tanpa mengirim muatan apa pun ke server.

Tanpa Pencatatan Input

Microdeck tidak mencatat atau menyimpan file dan teks yang Anda masukkan ke ruang kerja alat.

Memori Tab Sementara

Hasil kerja hanya tersimpan di memori tab dan langsung terhapus saat Anda me-reset atau menutup tab.

Pertanyaan yang Sering Diajukan (FAQ)

How accurate must the measurement be?

Within about 0.5 mm; repeat the test to confirm.

Do I need to save it?

Yes, send M500 after M92.

Is data uploaded?

No.

Jelajahi Alat Mikro Terkait

Dukung Microdeck

Sepenuhnya sukarela · Mulai $3 · Tanpa akun

Pilih jumlah (USD):Dipilih:$5

Jumlah dukungan minimum adalah $3 USD.

Sepenuhnya sukarela · Mulai $3 · Pembayaran aman melalui Gumroad.