So funktioniert es unter der Haube
Mark the filament, extrude a known length and measure how much actually went in. The new E-steps value is the old value times the requested length divided by the real length. The tool also reports the error and the G-code to apply and save the value.
Schritt-für-Schritt-Anleitung
Mark the filament 120 mm above the extruder.
Extrude 100 mm at printing temperature.
Measure the new distance to the mark.
Enter the numbers and apply the new E-steps.
Wichtige Funktionen & Vorteile
- Error percentage
- M92 and M500 commands
- Warning for large errors
Methodik, Formeln & technische Standards
New E-steps = current × requested ÷ actual.
Praxisbeispiele & Grenzfälle
97 mm instead of 100 mm
Current 93
New ≈ 95.9
Hinweise zu Grenzen & Genauigkeit
- • Mechanical problems such as slipping give meaningless results.
- • Do E-steps first and flow rate second.
Lokale Verarbeitung im Browser & Datenschutz
Herkömmliche Online-Konverter laden Ihre Dokumente, Texte oder Mediendateien auf fremde Server. 3D-Drucker E-Steps-Kalibrierungsrechner läuft direkt in Ihrem Browser-Tab:
Ihre Texte und Dateien werden lokal berechnet, ohne Inhalte an einen Verarbeitungsserver zu senden.
Microdeck protokolliert oder speichert weder Ihre Dateien noch Texteingaben (normale CDN-Abrufe laden lediglich die statische Seite).
Arbeitsergebnisse bleiben ausschließlich im Arbeitsspeicher des Tabs und werden beim Zurücksetzen oder Schließen freigegeben.
Häufig gestellte Fragen (FAQ)
How accurate must the measurement be?
Within about 0.5 mm; repeat the test to confirm.
Do I need to save it?
Yes, send M500 after M92.
Is data uploaded?
No.
Ähnliche Mikro-Tools entdecken
Extrusion Multiplier & Flussraten-Rechner
Flussrate anhand von Wandstärken-Test oder Filamentdurchmesser korrigieren
Schrittmotor Steps-per-mm-Rechner
Steps/mm für Riemen (GT2) und Spindeln (T8) für 3D-Drucker & CNC berechnen
Filament-Gewicht-Längen-Umrechner (PLA, ABS, PETG)
Gramm 3D-Drucker-Filament in Meter umrechnen und Kosten pro Meter ermitteln