Microdeck.tools 100% In-Browser

Voltage Divider Calculator

New

Compute Vout for a resistor divider, find R2 for a target output, see divider current and power, and check how a load changes the result.

100% In-Browser No Server Storage Instant Results

Did this tool save you time? Help keep Microdeck free and maintained. Completely optional · From $3.

How It Works Under the Hood

An unloaded divider gives Vout = Vin × R2 ÷ (R1 + R2). A load in parallel with R2 lowers the bottom resistance to R2 ∥ Rload, so the real output is lower. To hit a target, the tool solves R2 = R1 × Vout ÷ (Vin − Vout) and shows the nearest E24 part.

Step-by-Step Instructions

1

Choose whether to find the output voltage or the R2 for a target.

2

Enter Vin and R1 (4.7k, 10k and similar are accepted).

3

Enter R2 or the target voltage, and optionally a load resistance.

4

Read Vout, ratio, current, power and the loaded result.

Key Features & Performance

  • Both directions in one tool
  • Load resistance shows the voltage drop caused by the load
  • Nearest E24 value for the target mode
  • Power in each resistor

Worked Examples & Edge Cases

12 V divider

Input
Vin 12 V, R1 10 kΩ, R2 4.7 kΩ
Output
3.837 V unloaded

12 × 4.7 ÷ 14.7.

Hit 3.3 V

Input
Vin 12 V, R1 10 kΩ, target 3.3 V
Output
R2 = 3.79 kΩ, nearest E24 3.9 kΩ

Limitations, Scope & Accuracy Notes

  • • A divider is a poor power supply: any real load pulls the output down. Use a regulator for loads above a few milliamps.
  • • Resistor tolerance (1% to 5%) shifts the output by a similar amount.

Local Browser Processing & Privacy

Traditional web converters upload your documents, snippets, or media files to remote servers. Voltage Divider Calculator runs inside your browser tab:

Processed in This Tab

Your input text and files are processed locally without uploading payloads to a processing server.

No Tool Payload Logging

Microdeck does not log or store the files or inputs you paste into tool workspaces (normal static hosting/CDN requests still load page assets).

Tab Memory Lifecycle

Working outputs stay in your browser tab and are released when you reset the tool or close the tab.

Frequently Asked Questions

Can I power a microcontroller from a divider?

Only for a signal input with almost no current. For power, use a regulator, because the divider voltage changes with load.

How do I reduce loading error?

Make R1 and R2 at least 10 times smaller than the load resistance, at the cost of more standing current.

Is the data private?

Yes, everything runs locally.

Explore Related Micro-Tools

Support Microdeck

Completely optional · From $3 · No account required

Choose an amount (USD):Selected:$5

Minimum support amount is $3 USD.

Completely optional · From $3 · Checkout opens on Gumroad.