Microdeck.tools 100% In-Browser

Extrusion Multiplier / Flow Rate Calculator

New

Calculate a new extrusion multiplier or flow percentage from the expected and measured wall thickness, or from the measured filament diameter.

100% In-Browser No Server Storage Instant Results

Did this tool save you time? Help keep Microdeck free and maintained. Completely optional · From $3.

How It Works Under the Hood

Print a single-wall cube, measure the wall with calipers and compare it to the line width in your slicer. The new multiplier is the old one times expected over measured. If your filament is not the stated diameter, the tool also gives the flow factor (nominal ÷ measured)².

Step-by-Step Instructions

1

Enter the current flow value.

2

Enter the expected and measured wall thickness.

3

Optionally enter the nominal and measured filament diameter.

4

Apply the new value and print another cube.

Key Features & Performance

  • Wall test method
  • Filament diameter method
  • Warning for large changes

Methodology, Formulas & Technical Standards

New = current × expected ÷ measured. Diameter factor = (nominal ÷ measured)².

Worked Examples & Edge Cases

0.45 expected, 0.48 measured

Input
Current 100%
Output
New 93.75%

Limitations, Scope & Accuracy Notes

  • • Calibrate E-steps and temperature first.

Local Browser Processing & Privacy

Traditional web converters upload your documents, snippets, or media files to remote servers. Extrusion Multiplier / Flow Rate Calculator runs inside your browser tab:

Processed in This Tab

Your input text and files are processed locally without uploading payloads to a processing server.

No Tool Payload Logging

Microdeck does not log or store the files or inputs you paste into tool workspaces (normal static hosting/CDN requests still load page assets).

Tab Memory Lifecycle

Working outputs stay in your browser tab and are released when you reset the tool or close the tab.

Frequently Asked Questions

Is flow the same as extrusion multiplier?

Yes, slicers use both names for the same setting.

How many measurements?

Average at least four points around the cube.

Is data uploaded?

No.

Explore Related Micro-Tools

Support Microdeck

Completely optional · From $3 · No account required

Choose an amount (USD):Selected:$5

Minimum support amount is $3 USD.

Completely optional · From $3 · Checkout opens on Gumroad.