Microdeck.tools 100% di Browser

Kalkulator Extrusion Multiplier / Laju Alir Slicer

New

Hitung nilai Extrusion Multiplier (Flow %) yang tepat untuk slicer berdasarkan pengukuran ketebalan dinding menggunakan jangka sorong.

100% di Browser Tanpa Upload Server Hasil Instan

Apakah alat ini menghemat waktu Anda? Bantu jaga Microdeck tetap gratis dan terawat. Sepenuhnya sukarela · Mulai $3.

Cara Kerja di Balik Layar

Print a single-wall cube, measure the wall with calipers and compare it to the line width in your slicer. The new multiplier is the old one times expected over measured. If your filament is not the stated diameter, the tool also gives the flow factor (nominal ÷ measured)².

Panduan Langkah demi Langkah

1

Enter the current flow value.

2

Enter the expected and measured wall thickness.

3

Optionally enter the nominal and measured filament diameter.

4

Apply the new value and print another cube.

Fitur Utama & Performa

  • Wall test method
  • Filament diameter method
  • Warning for large changes

Metodologi, Rumus & Standar Teknis

New = current × expected ÷ measured. Diameter factor = (nominal ÷ measured)².

Contoh Kasus & Uji Coba

0.45 expected, 0.48 measured

Input
Current 100%
Output
New 93.75%

Catatan Batasan & Akurasi

  • • Calibrate E-steps and temperature first.

Pemrosesan Lokal di Browser & Privasi

Konverter web konvensional mengunggah dokumen, teks, atau media ke server jarak jauh. Kalkulator Extrusion Multiplier / Laju Alir Slicer berjalan langsung di tab browser Anda:

Diproses di Tab Ini

Teks dan file Anda diproses secara lokal tanpa mengirim muatan apa pun ke server.

Tanpa Pencatatan Input

Microdeck tidak mencatat atau menyimpan file dan teks yang Anda masukkan ke ruang kerja alat.

Memori Tab Sementara

Hasil kerja hanya tersimpan di memori tab dan langsung terhapus saat Anda me-reset atau menutup tab.

Pertanyaan yang Sering Diajukan (FAQ)

Is flow the same as extrusion multiplier?

Yes, slicers use both names for the same setting.

How many measurements?

Average at least four points around the cube.

Is data uploaded?

No.

Jelajahi Alat Mikro Terkait

Dukung Microdeck

Sepenuhnya sukarela · Mulai $3 · Tanpa akun

Pilih jumlah (USD):Dipilih:$5

Jumlah dukungan minimum adalah $3 USD.

Sepenuhnya sukarela · Mulai $3 · Pembayaran aman melalui Gumroad.