Cómo funciona por dentro
Print a single-wall cube, measure the wall with calipers and compare it to the line width in your slicer. The new multiplier is the old one times expected over measured. If your filament is not the stated diameter, the tool also gives the flow factor (nominal ÷ measured)².
Instrucciones paso a paso
Enter the current flow value.
Enter the expected and measured wall thickness.
Optionally enter the nominal and measured filament diameter.
Apply the new value and print another cube.
Funciones principales y ventajas
- Wall test method
- Filament diameter method
- Warning for large changes
Metodología, fórmulas y estándares técnicos
New = current × expected ÷ measured. Diameter factor = (nominal ÷ measured)².
Ejemplos prácticos y casos límite
0.45 expected, 0.48 measured
Current 100%
New 93.75%
Límites y notas de precisión
- • Calibrate E-steps and temperature first.
Procesamiento local en tu navegador y privacidad
Los conversores tradicionales suben tus documentos, textos o archivos multimedia a servidores remotos. Calculadora de Multiplicador de Extrusión / Flujo se ejecuta dentro de tu pestaña:
Tus textos y archivos se procesan localmente sin enviarse a ningún servidor externo.
Microdeck no guarda ni registra el contenido que introduces en las herramientas.
Los resultados permanecen en la memoria de tu navegador y se liberan al cerrar o reiniciar.
Preguntas frecuentes (FAQ)
Is flow the same as extrusion multiplier?
Yes, slicers use both names for the same setting.
How many measurements?
Average at least four points around the cube.
Is data uploaded?
No.
Explora herramientas relacionadas
Calculadora de Calibración de E-Steps para Impresora 3D
Calcula los nuevos pasos del extrusor (E-Steps) a partir de la longitud real extruida
Calculadora de Costes y Electricidad de Impresión 3D
Coste de material, energía, desgaste y tiempo con cálculo de precio de venta
Conversor de Peso a Longitud de Filamento 3D
Convierte gramos de filamento a metros y viceversa, con coste por metro