底層運作原理
The voltage ratio of an ideal transformer equals the turns ratio, and the current ratio is the inverse. Enter the voltages to get the ratio (and the secondary turns when you know the primary turns), or enter the turns and the primary voltage to get the secondary voltage. Add a load current to get the VA and the current drawn from the primary.
詳細操作步驟
Choose whether you know the voltages or the turns.
Enter the values.
Optionally add the secondary current and efficiency.
Read the ratio, voltage, turns and currents.
核心功能與效能優勢
- Voltage, turns and ratio
- Step-up or step-down label
- Secondary VA and primary current
- Efficiency input
運算方法、公式與技術標準
Vp ÷ Vs = Np ÷ Ns = Is ÷ Ip. Primary current = secondary VA ÷ (efficiency × Vp).
實作範例與邊界案例
230 V to 12 V
Ratio
19.17 : 1, step-down
2 A at 12 V
24 VA
About 0.11 A on the 230 V side
使用限制與精準度說明
- • Ideal-transformer model: losses, regulation and core saturation are not modelled.
- • Mains work should be done by qualified people.
瀏覽器本地運算與隱私保障
傳統線上轉換網站會將您的文件、文字片段或影音檔案上傳至遠端伺服器。變壓器圈數比計算器 (電壓與阻抗比) 完全在您的瀏覽器分頁內運行:
您的檔案與文字都在裝置本機計算,不會傳送內容至任何後端伺服器。
Microdeck 不會記錄或儲存您在工具內貼上的任何檔案或程式碼。
所有暫存結果僅存在目前分頁記憶體中,重設或關閉分頁後即刻清除。
常見問題 (FAQ)
Is the secondary voltage under load lower?
Yes. The no-load voltage is a few percent higher than the rated value.
Can it design a core?
No, it only does the ratio and current arithmetic.
Is anything uploaded?
No.