Cómo funciona por dentro
The voltage ratio of an ideal transformer equals the turns ratio, and the current ratio is the inverse. Enter the voltages to get the ratio (and the secondary turns when you know the primary turns), or enter the turns and the primary voltage to get the secondary voltage. Add a load current to get the VA and the current drawn from the primary.
Instrucciones paso a paso
Choose whether you know the voltages or the turns.
Enter the values.
Optionally add the secondary current and efficiency.
Read the ratio, voltage, turns and currents.
Funciones principales y ventajas
- Voltage, turns and ratio
- Step-up or step-down label
- Secondary VA and primary current
- Efficiency input
Metodología, fórmulas y estándares técnicos
Vp ÷ Vs = Np ÷ Ns = Is ÷ Ip. Primary current = secondary VA ÷ (efficiency × Vp).
Ejemplos prácticos y casos límite
230 V to 12 V
Ratio
19.17 : 1, step-down
2 A at 12 V
24 VA
About 0.11 A on the 230 V side
Límites y notas de precisión
- • Ideal-transformer model: losses, regulation and core saturation are not modelled.
- • Mains work should be done by qualified people.
Procesamiento local en tu navegador y privacidad
Los conversores tradicionales suben tus documentos, textos o archivos multimedia a servidores remotos. Calculadora de Relación de Vueltas de Transformador se ejecuta dentro de tu pestaña:
Tus textos y archivos se procesan localmente sin enviarse a ningún servidor externo.
Microdeck no guarda ni registra el contenido que introduces en las herramientas.
Los resultados permanecen en la memoria de tu navegador y se liberan al cerrar o reiniciar.
Preguntas frecuentes (FAQ)
Is the secondary voltage under load lower?
Yes. The no-load voltage is a few percent higher than the rated value.
Can it design a core?
No, it only does the ratio and current arithmetic.
Is anything uploaded?
No.
Explora herramientas relacionadas
Calculadora de ley de Ohm y potencia
Introduzca dos de tensión, corriente, resistencia o potencia y obtenga las otras dos
Calculadora de Autonomía de Inversor y Batería
Calcula cuántas horas funcionará tu inversor de 12V/24V/48V con tu carga en vatios
Calibre de cable (AWG) y caída de tensión
Elegir el cable según corriente y longitud, o comprobar la caída de tensión