So funktioniert es unter der Haube
The voltage ratio of an ideal transformer equals the turns ratio, and the current ratio is the inverse. Enter the voltages to get the ratio (and the secondary turns when you know the primary turns), or enter the turns and the primary voltage to get the secondary voltage. Add a load current to get the VA and the current drawn from the primary.
Schritt-für-Schritt-Anleitung
Choose whether you know the voltages or the turns.
Enter the values.
Optionally add the secondary current and efficiency.
Read the ratio, voltage, turns and currents.
Wichtige Funktionen & Vorteile
- Voltage, turns and ratio
- Step-up or step-down label
- Secondary VA and primary current
- Efficiency input
Methodik, Formeln & technische Standards
Vp ÷ Vs = Np ÷ Ns = Is ÷ Ip. Primary current = secondary VA ÷ (efficiency × Vp).
Praxisbeispiele & Grenzfälle
230 V to 12 V
Ratio
19.17 : 1, step-down
2 A at 12 V
24 VA
About 0.11 A on the 230 V side
Hinweise zu Grenzen & Genauigkeit
- • Ideal-transformer model: losses, regulation and core saturation are not modelled.
- • Mains work should be done by qualified people.
Lokale Verarbeitung im Browser & Datenschutz
Herkömmliche Online-Konverter laden Ihre Dokumente, Texte oder Mediendateien auf fremde Server. Transformator-Windungsverhältnis-Rechner läuft direkt in Ihrem Browser-Tab:
Ihre Texte und Dateien werden lokal berechnet, ohne Inhalte an einen Verarbeitungsserver zu senden.
Microdeck protokolliert oder speichert weder Ihre Dateien noch Texteingaben (normale CDN-Abrufe laden lediglich die statische Seite).
Arbeitsergebnisse bleiben ausschließlich im Arbeitsspeicher des Tabs und werden beim Zurücksetzen oder Schließen freigegeben.
Häufig gestellte Fragen (FAQ)
Is the secondary voltage under load lower?
Yes. The no-load voltage is a few percent higher than the rated value.
Can it design a core?
No, it only does the ratio and current arithmetic.
Is anything uploaded?
No.
Ähnliche Mikro-Tools entdecken
Ohmsches Gesetz & Leistung berechnen
Zwei von Spannung, Strom, Widerstand und Leistung eingeben, die anderen zwei erhalten
Wechselrichter-Laufzeit- und Lastrechner
Batterielaufzeit für 12V/24V/48V Wechselrichter unter Last berechnen
Leitungsquerschnitt (AWG) & Spannungsabfall
Drahtgröße für Strom und Länge wählen oder den Spannungsabfall prüfen