작동 원리 및 구조
The voltage ratio of an ideal transformer equals the turns ratio, and the current ratio is the inverse. Enter the voltages to get the ratio (and the secondary turns when you know the primary turns), or enter the turns and the primary voltage to get the secondary voltage. Add a load current to get the VA and the current drawn from the primary.
단계별 사용 방법
Choose whether you know the voltages or the turns.
Enter the values.
Optionally add the secondary current and efficiency.
Read the ratio, voltage, turns and currents.
주요 기능 및 장점
- Voltage, turns and ratio
- Step-up or step-down label
- Secondary VA and primary current
- Efficiency input
계산 방식, 공식 및 기술 표준
Vp ÷ Vs = Np ÷ Ns = Is ÷ Ip. Primary current = secondary VA ÷ (efficiency × Vp).
입출력 예시 및 엣지 케이스
230 V to 12 V
Ratio
19.17 : 1, step-down
2 A at 12 V
24 VA
About 0.11 A on the 230 V side
제한 사항 및 정확도 안내
- • Ideal-transformer model: losses, regulation and core saturation are not modelled.
- • Mains work should be done by qualified people.
브라우저 로컬 처리 및 개인정보 보호
일반 웹 변환기는 문서나 미디어 파일을 원격 서버에 업로드합니다. 변압기 권수비 계산기 (트랜스포머) 도구는 현재 브라우저 탭 내부에서만 실행됩니다:
입력 텍스트와 파일은 외부 서버로 전송되지 않고 기기 내에서 로컬로 계산됩니다.
도구에 붙여넣은 파일이나 데이터를 서버에 기록하거나 저장하지 않습니다.
작업 결과는 브라우저 탭 메모리에만 유지되며 탭을 닫거나 초기화하면 즉시 해제됩니다.
자주 묻는 질문 (FAQ)
Is the secondary voltage under load lower?
Yes. The no-load voltage is a few percent higher than the rated value.
Can it design a core?
No, it only does the ratio and current arithmetic.
Is anything uploaded?
No.