底層運作原理
A strain gauge changes resistance by GF × strain. In a Wheatstone bridge that becomes a small voltage: a quarter bridge gives about GF × strain ÷ 4 per volt of excitation, a half bridge GF × strain ÷ 2 and a full bridge GF × strain. Enter the gauge factor, excitation and strain, or a measured output to get the strain.
詳細操作步驟
Choose strain → output or output → strain.
Pick the bridge configuration.
Enter gauge factor, excitation voltage and the value.
Read the result and the amplifier gain suggestion.
核心功能與效能優勢
- Quarter, half and full bridge
- Exact quarter-bridge non-linearity
- mV and mV/V
- Amplifier gain for an ADC range
運算方法、公式與技術標準
Quarter: Vout/Vex = (GF·ε/4)/(1 + GF·ε/2). Half: GF·ε/2. Full: GF·ε.
實作範例與邊界案例
1000 µε, GF 2.1, 5 V
Quarter bridge
≈ 2.6 mV
使用限制與精準度說明
- • Lead-wire resistance, temperature and bridge imbalance are not included.
- • Assumes equal bridge resistors.
瀏覽器本地運算與隱私保障
傳統線上轉換網站會將您的文件、文字片段或影音檔案上傳至遠端伺服器。惠斯登電橋計算器 (應變規與稱重感測器) 完全在您的瀏覽器分頁內運行:
您的檔案與文字都在裝置本機計算,不會傳送內容至任何後端伺服器。
Microdeck 不會記錄或儲存您在工具內貼上的任何檔案或程式碼。
所有暫存結果僅存在目前分頁記憶體中,重設或關閉分頁後即刻清除。
常見問題 (FAQ)
What is µε?
Microstrain: 10⁻⁶ change in length per length.
Why is the signal so small?
Typical outputs are a few mV, so an instrumentation amplifier is needed.
Is data uploaded?
No.