Microdeck.tools 100 % en el navegador

Calculadora de Puente de Wheatstone (Galgas y Celdas de Carga)

New

Calcula la salida de tensión de galgas extensométricas y celdas de carga según microdeformación, factor de galga y voltaje de excitación.

100 % en tu navegador Sin subir archivos Resultados al instante

¿Te ahorró tiempo esta herramienta? Ayuda a mantener Microdeck gratis y al día. Opcional · Desde $3.

Cómo funciona por dentro

A strain gauge changes resistance by GF × strain. In a Wheatstone bridge that becomes a small voltage: a quarter bridge gives about GF × strain ÷ 4 per volt of excitation, a half bridge GF × strain ÷ 2 and a full bridge GF × strain. Enter the gauge factor, excitation and strain, or a measured output to get the strain.

Instrucciones paso a paso

1

Choose strain → output or output → strain.

2

Pick the bridge configuration.

3

Enter gauge factor, excitation voltage and the value.

4

Read the result and the amplifier gain suggestion.

Funciones principales y ventajas

  • Quarter, half and full bridge
  • Exact quarter-bridge non-linearity
  • mV and mV/V
  • Amplifier gain for an ADC range

Metodología, fórmulas y estándares técnicos

Quarter: Vout/Vex = (GF·ε/4)/(1 + GF·ε/2). Half: GF·ε/2. Full: GF·ε.

Ejemplos prácticos y casos límite

1000 µε, GF 2.1, 5 V

Entrada
Quarter bridge
Salida
≈ 2.6 mV

Límites y notas de precisión

  • • Lead-wire resistance, temperature and bridge imbalance are not included.
  • • Assumes equal bridge resistors.

Procesamiento local en tu navegador y privacidad

Los conversores tradicionales suben tus documentos, textos o archivos multimedia a servidores remotos. Calculadora de Puente de Wheatstone (Galgas y Celdas de Carga) se ejecuta dentro de tu pestaña:

Procesado en esta pestaña

Tus textos y archivos se procesan localmente sin enviarse a ningún servidor externo.

Sin registro de tus archivos

Microdeck no guarda ni registra el contenido que introduces en las herramientas.

Memoria temporal de la pestaña

Los resultados permanecen en la memoria de tu navegador y se liberan al cerrar o reiniciar.

Preguntas frecuentes (FAQ)

What is µε?

Microstrain: 10⁻⁶ change in length per length.

Why is the signal so small?

Typical outputs are a few mV, so an instrumentation amplifier is needed.

Is data uploaded?

No.

Explora herramientas relacionadas

Apoyar a Microdeck

Totalmente opcional · Desde $3 · Sin cuenta

Elige un importe (USD):Seleccionado:$5

El aporte mínimo es de $3 USD.

Totalmente opcional · Desde $3 · Pago seguro en Gumroad.