작동 원리 및 구조
A strain gauge changes resistance by GF × strain. In a Wheatstone bridge that becomes a small voltage: a quarter bridge gives about GF × strain ÷ 4 per volt of excitation, a half bridge GF × strain ÷ 2 and a full bridge GF × strain. Enter the gauge factor, excitation and strain, or a measured output to get the strain.
단계별 사용 방법
Choose strain → output or output → strain.
Pick the bridge configuration.
Enter gauge factor, excitation voltage and the value.
Read the result and the amplifier gain suggestion.
주요 기능 및 장점
- Quarter, half and full bridge
- Exact quarter-bridge non-linearity
- mV and mV/V
- Amplifier gain for an ADC range
계산 방식, 공식 및 기술 표준
Quarter: Vout/Vex = (GF·ε/4)/(1 + GF·ε/2). Half: GF·ε/2. Full: GF·ε.
입출력 예시 및 엣지 케이스
1000 µε, GF 2.1, 5 V
Quarter bridge
≈ 2.6 mV
제한 사항 및 정확도 안내
- • Lead-wire resistance, temperature and bridge imbalance are not included.
- • Assumes equal bridge resistors.
브라우저 로컬 처리 및 개인정보 보호
일반 웹 변환기는 문서나 미디어 파일을 원격 서버에 업로드합니다. 휘트스톤 브리지 계산기 (스트레인 게이지 및 로드셀) 도구는 현재 브라우저 탭 내부에서만 실행됩니다:
입력 텍스트와 파일은 외부 서버로 전송되지 않고 기기 내에서 로컬로 계산됩니다.
도구에 붙여넣은 파일이나 데이터를 서버에 기록하거나 저장하지 않습니다.
작업 결과는 브라우저 탭 메모리에만 유지되며 탭을 닫거나 초기화하면 즉시 해제됩니다.
자주 묻는 질문 (FAQ)
What is µε?
Microstrain: 10⁻⁶ change in length per length.
Why is the signal so small?
Typical outputs are a few mV, so an instrumentation amplifier is needed.
Is data uploaded?
No.