Microdeck.tools 100% 瀏覽器本地執行

RC 舵機脈寬與角度換算器

New

在微控制器 (Arduino/STM32) 與模型遙控中,將標準 PPM/PWM 控制脈寬(微秒 µs)即時換算為舵機擺臂角度與占空比。

100% 瀏覽器本地執行 不上傳至伺服器 即時顯示結果

這個工具替您省下寶貴時間了嗎? 歡迎自願贊助,協助 Microdeck 維持免費與穩定運作 · 最低 $3 起。

底層運作原理

Hobby servos read a pulse every 20 ms. The pulse width sets the angle linearly between the minimum and maximum pulse. Enter your servo end points and travel and convert either way. The tool also shows the duty cycle at the chosen frequency.

詳細操作步驟

1

Choose angle → pulse or pulse → angle.

2

Enter the end-point pulses and full travel of your servo.

3

Enter the angle or pulse width.

4

Read the result and the duty cycle.

核心功能與效能優勢

  • Custom end points and travel
  • Duty cycle at your frequency
  • Warnings outside the travel
  • Presets via examples

運算方法、公式與技術標準

Pulse = min + (angle ÷ travel) × (max − min). Duty = pulse ÷ period.

實作範例與邊界案例

90° on 1000–2000 µs

輸入
180° travel
輸出
1500 µs, 7.5% duty at 50 Hz

使用限制與精準度說明

  • • End points differ between servos; calibrate carefully.
  • • Continuous-rotation servos use the pulse as a speed, not an angle.

瀏覽器本地運算與隱私保障

傳統線上轉換網站會將您的文件、文字片段或影音檔案上傳至遠端伺服器。RC 舵機脈寬與角度換算器 完全在您的瀏覽器分頁內運行:

於此分頁本地處理

您的檔案與文字都在裝置本機計算,不會傳送內容至任何後端伺服器。

絕不記錄操作內容

Microdeck 不會記錄或儲存您在工具內貼上的任何檔案或程式碼。

分頁記憶體即時釋放

所有暫存結果僅存在目前分頁記憶體中,重設或關閉分頁後即刻清除。

常見問題 (FAQ)

What is the standard servo pulse?

1500 µs is centre, 1000 µs and 2000 µs are the end points on most hobby servos.

Why does my servo buzz at the end?

The pulse may be beyond the physical travel.

Is my data uploaded?

No.

探索相關微型工具

支持 Microdeck

完全自願 · $3 起 · 免註冊帳號

選擇金額 (USD):已選金額:$5

單次最低贊助金額為 $3 USD。

完全自願 · $3 起 · 將透過 Gumroad 安全結帳頁面完成。