Como funciona por dentro
Hobby servos read a pulse every 20 ms. The pulse width sets the angle linearly between the minimum and maximum pulse. Enter your servo end points and travel and convert either way. The tool also shows the duty cycle at the chosen frequency.
Passo a passo de uso
Choose angle → pulse or pulse → angle.
Enter the end-point pulses and full travel of your servo.
Enter the angle or pulse width.
Read the result and the duty cycle.
Principais recursos e vantagens
- Custom end points and travel
- Duty cycle at your frequency
- Warnings outside the travel
- Presets via examples
Metodologia, fórmulas e padrões técnicos
Pulse = min + (angle ÷ travel) × (max − min). Duty = pulse ÷ period.
Exemplos resolvidos e casos especiais
90° on 1000–2000 µs
180° travel
1500 µs, 7.5% duty at 50 Hz
Limitações e notas de precisão
- • End points differ between servos; calibrate carefully.
- • Continuous-rotation servos use the pulse as a speed, not an angle.
Processamento local no navegador e privacidade
Conversores comuns enviam seus documentos, códigos ou vídeos para servidores externos. O Conversor de Largura de Pulso de Servo RC para Ângulo roda direto na sua aba:
Seus textos e arquivos são processados localmente sem enviar conteúdo para servidores.
O Microdeck não registra nem armazena arquivos ou dados colados nas ferramentas.
Os resultados ficam apenas na memória do navegador e somem ao fechar ou limpar a aba.
Perguntas frequentes (FAQ)
What is the standard servo pulse?
1500 µs is centre, 1000 µs and 2000 µs are the end points on most hobby servos.
Why does my servo buzz at the end?
The pulse may be beyond the physical travel.
Is my data uploaded?
No.
Outras ferramentas relacionadas
Calculadora de Temporizador 555 (Astável e Monoestável)
Calcule frequência, duty cycle e largura de pulso a partir de R1, R2 e C
Calculadora da lei de Ohm e potência
Informe duas entre tensão, corrente, resistência e potência e obtenha as outras duas
Configurador de Pack de Baterias (Série/Paralelo xSyP)
Calcule tensão, capacidade Ah, energia Wh e corrente de descarga para Li-Ion e LiFePO4