仕組みと内部処理
Hobby servos read a pulse every 20 ms. The pulse width sets the angle linearly between the minimum and maximum pulse. Enter your servo end points and travel and convert either way. The tool also shows the duty cycle at the chosen frequency.
使い方ステップ
Choose angle → pulse or pulse → angle.
Enter the end-point pulses and full travel of your servo.
Enter the angle or pulse width.
Read the result and the duty cycle.
主な機能と特長
- Custom end points and travel
- Duty cycle at your frequency
- Warnings outside the travel
- Presets via examples
計算ロジック・仕様・技術基準
Pulse = min + (angle ÷ travel) × (max − min). Duty = pulse ÷ period.
入出力の例・エッジケース
90° on 1000–2000 µs
180° travel
1500 µs, 7.5% duty at 50 Hz
仕様上の制限・精度に関するご注意
- • End points differ between servos; calibrate carefully.
- • Continuous-rotation servos use the pulse as a speed, not an angle.
ブラウザ内ローカル処理とプライバシー保護
一般的なWebツールは文書やメディアを外部サーバーへ送信します。RCサーボパルス幅・角度変換計算機 はお使いのブラウザタブ内のみで完結します:
入力テキストやファイルは端末内で処理され、外部の処理サーバーへアップロードされません。
作業内容や貼り付けたデータを保存・記録しません(通常の静的配信CDNリクエストのみ発生します)。
作業データはタブ内のメモリ上のみに保持され、リセットまたはタブを閉じると破棄されます。
よくある質問 (FAQ)
What is the standard servo pulse?
1500 µs is centre, 1000 µs and 2000 µs are the end points on most hobby servos.
Why does my servo buzz at the end?
The pulse may be beyond the physical travel.
Is my data uploaded?
No.