작동 원리 및 구조
Hobby servos read a pulse every 20 ms. The pulse width sets the angle linearly between the minimum and maximum pulse. Enter your servo end points and travel and convert either way. The tool also shows the duty cycle at the chosen frequency.
단계별 사용 방법
Choose angle → pulse or pulse → angle.
Enter the end-point pulses and full travel of your servo.
Enter the angle or pulse width.
Read the result and the duty cycle.
주요 기능 및 장점
- Custom end points and travel
- Duty cycle at your frequency
- Warnings outside the travel
- Presets via examples
계산 방식, 공식 및 기술 표준
Pulse = min + (angle ÷ travel) × (max − min). Duty = pulse ÷ period.
입출력 예시 및 엣지 케이스
90° on 1000–2000 µs
180° travel
1500 µs, 7.5% duty at 50 Hz
제한 사항 및 정확도 안내
- • End points differ between servos; calibrate carefully.
- • Continuous-rotation servos use the pulse as a speed, not an angle.
브라우저 로컬 처리 및 개인정보 보호
일반 웹 변환기는 문서나 미디어 파일을 원격 서버에 업로드합니다. RC 서보 펄스 폭 - 각도 변환기 도구는 현재 브라우저 탭 내부에서만 실행됩니다:
입력 텍스트와 파일은 외부 서버로 전송되지 않고 기기 내에서 로컬로 계산됩니다.
도구에 붙여넣은 파일이나 데이터를 서버에 기록하거나 저장하지 않습니다.
작업 결과는 브라우저 탭 메모리에만 유지되며 탭을 닫거나 초기화하면 즉시 해제됩니다.
자주 묻는 질문 (FAQ)
What is the standard servo pulse?
1500 µs is centre, 1000 µs and 2000 µs are the end points on most hobby servos.
Why does my servo buzz at the end?
The pulse may be beyond the physical travel.
Is my data uploaded?
No.