Microdeck.tools 100 % en el navegador

Conversor de Ancho de Pulso de Servo RC a Ángulo

New

Convierte el ancho de pulso de servos de radiocontrol a ángulo de rotación y calcula el porcentaje de ciclo de trabajo en 50 Hz.

100 % en tu navegador Sin subir archivos Resultados al instante

¿Te ahorró tiempo esta herramienta? Ayuda a mantener Microdeck gratis y al día. Opcional · Desde $3.

Cómo funciona por dentro

Hobby servos read a pulse every 20 ms. The pulse width sets the angle linearly between the minimum and maximum pulse. Enter your servo end points and travel and convert either way. The tool also shows the duty cycle at the chosen frequency.

Instrucciones paso a paso

1

Choose angle → pulse or pulse → angle.

2

Enter the end-point pulses and full travel of your servo.

3

Enter the angle or pulse width.

4

Read the result and the duty cycle.

Funciones principales y ventajas

  • Custom end points and travel
  • Duty cycle at your frequency
  • Warnings outside the travel
  • Presets via examples

Metodología, fórmulas y estándares técnicos

Pulse = min + (angle ÷ travel) × (max − min). Duty = pulse ÷ period.

Ejemplos prácticos y casos límite

90° on 1000–2000 µs

Entrada
180° travel
Salida
1500 µs, 7.5% duty at 50 Hz

Límites y notas de precisión

  • • End points differ between servos; calibrate carefully.
  • • Continuous-rotation servos use the pulse as a speed, not an angle.

Procesamiento local en tu navegador y privacidad

Los conversores tradicionales suben tus documentos, textos o archivos multimedia a servidores remotos. Conversor de Ancho de Pulso de Servo RC a Ángulo se ejecuta dentro de tu pestaña:

Procesado en esta pestaña

Tus textos y archivos se procesan localmente sin enviarse a ningún servidor externo.

Sin registro de tus archivos

Microdeck no guarda ni registra el contenido que introduces en las herramientas.

Memoria temporal de la pestaña

Los resultados permanecen en la memoria de tu navegador y se liberan al cerrar o reiniciar.

Preguntas frecuentes (FAQ)

What is the standard servo pulse?

1500 µs is centre, 1000 µs and 2000 µs are the end points on most hobby servos.

Why does my servo buzz at the end?

The pulse may be beyond the physical travel.

Is my data uploaded?

No.

Explora herramientas relacionadas

Apoyar a Microdeck

Totalmente opcional · Desde $3 · Sin cuenta

Elige un importe (USD):Seleccionado:$5

El aporte mínimo es de $3 USD.

Totalmente opcional · Desde $3 · Pago seguro en Gumroad.