Microdeck.tools 100% 瀏覽器本地執行

室內照明流明與勒克斯計算器

New

依目標勒克斯、面積、利用係數與維護係數計算總流明與燈具數量,也可由流明反推勒克斯。

100% 瀏覽器本地執行 不上傳至伺服器 即時顯示結果

這個工具替您省下寶貴時間了嗎? 歡迎自願贊助,協助 Microdeck 維持免費與穩定運作 · 最低 $3 起。

底層運作原理

Lux is lumens per square metre. The lumen method gives total lumens = lux × area ÷ (utilisation factor × maintenance factor). The utilisation factor (how much light reaches the work plane) is often 0.5 to 0.7 and the maintenance factor (dirt and lamp ageing) about 0.8. Divide by the lumens of one bulb to get the count, rounded up.

詳細操作步驟

1

Pick a room type to load a typical target lux, or enter your own.

2

Enter the room size.

3

Adjust the utilisation and maintenance factors if you know them.

4

Enter the lumens of one bulb to get the number of fittings, and the lamp efficacy to estimate the power.

核心功能與效能優勢

  • Room presets from hallways to workshops
  • Total lumens needed and bulb count rounded up
  • Estimated watts from lamp efficacy
  • Metric or feet input

實作範例與邊界案例

Living room

輸入
200 lux, 20 m², UF 0.6, MF 0.8
輸出
8,333 lm, about 11 bulbs of 800 lm

使用限制與精準度說明

  • • Typical lux levels vary by standard and country; use the figure from your local lighting standard for workplaces.
  • • Colour temperature, glare and fitting layout matter as much as raw lumens.

瀏覽器本地運算與隱私保障

傳統線上轉換網站會將您的文件、文字片段或影音檔案上傳至遠端伺服器。室內照明流明與勒克斯計算器 完全在您的瀏覽器分頁內運行:

於此分頁本地處理

您的檔案與文字都在裝置本機計算,不會傳送內容至任何後端伺服器。

絕不記錄操作內容

Microdeck 不會記錄或儲存您在工具內貼上的任何檔案或程式碼。

分頁記憶體即時釋放

所有暫存結果僅存在目前分頁記憶體中,重設或關閉分頁後即刻清除。

常見問題 (FAQ)

How many lux for a home?

Around 100 to 200 lux for living areas, 300 to 500 for kitchens and desks, and 500 or more for detailed work.

Lumens or watts?

Lumens measure light. With LEDs, watts only tell you power use, so choose by lumens.

Why is the utilisation factor below 1?

Some light is absorbed by walls, fittings and the ceiling before it reaches the floor or desk.

探索相關微型工具

支持 Microdeck

完全自願 · $3 起 · 免註冊帳號

選擇金額 (USD):已選金額:$5

單次最低贊助金額為 $3 USD。

完全自願 · $3 起 · 將透過 Gumroad 安全結帳頁面完成。